AIWA CX-NV20U Operating Instructions - Page 8
Connections
View all AIWA CX-NV20U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
1@ lrFM 75 Q CONNECTIONS BASIC CONNECTIONS Connect the equipment and accessories following steps 1 to 3. After connecting the following items, as shown in illustration u , the unit is ready for operation. q Refer also to page 34 on connecting optional equipment, for example, a television or turntable. 1 Connect the speakers with the unit. Connect the right speaker to the R'terminal, and the left to the L terminal. Open the lever of the speaker terminals and insert the conductor of the speaker cords with the stripe to @ and that of the other cords to ~. Then, shut the lever to lock. If connecting speakers other than the supplied ones Use speakers with an impedance of 6 ohms. m q This speaker system is magnetically shielded. However, if the speaker should affect the color on your TV screen, turn off the TV and turn it on again 15 - 30 minutes later. If the TV screen still has poor color, place the speaker system away from the TV. q Do not leave magnets or objects generating magnetism near the speaker system. 2 Connect the supplied antennas. + See illustration 2-m . Push the lever of each terminal, and insert the conductor. Then, release the lever to lock. FM: Connect the conductor of the FM feeder antenna @to the FM 75 Q terminals. AM: Connect the conductor of the AM loop antenna (@tothe AM LOOP terminals. To be continued. uQ