Aastra 6753i 6753i User Guide, SP3, HF1 - Page 102
Using the Paging Key
View all Aastra 6753i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Line Keys and Programmable Keys Using the Paging Key The following procedure describes the use of the Paging key on the IP Phone. The procedure assumes you have already configured the Paging key using the Aastra Web UI. IP Phone UI Notes: 1. Recipient of a Paging call can set a global "Do Not Disturb" (DND) to ignore any incoming pages. 2. For incoming Paging, the phone uses the Intercom configuration settings. The incoming Page is dependant on the "Allow Barge-In" parameter setting and the "Idling/On Call" state. 1. On the IP Phone, press the key you configured for Paging. The phone opens a multicast RTP session and an outgoing OR incoming phone screen displays as follows: Paging = Drop 00:01 2. Press the Drop key to end the multicast RTP session and return to the idle screen. Note: If you enable global DND on the phone, the incoming multicast RTP session is dropped. 95 41-001380-00 REV01 - 06.2013