Aastra 6753i 6753i User Guide, SP3, HF1 - Page 111

Handling Calls When you are connected to a call, you can use the hard keys or programmable keys on the phone to place a call on hold, transfer a call, or conference. Placing a Call on Hold You can place an active call on hold by pressing the Hold retrieve the call. When a call is on hold, the icon displays on-hook as follows. key. When you place a call on hold, only your phone can 1 Call held 03:05 For on-hold calls, the timer displays as running and the Line and main LEDs flash. IP Phone UI To place a call on hold 1. Connect to the call (if not already connected). 2. Press the Hold key. Call held Jun 8 2:55pm The line/call appearance light begins to flash slowly and after a short time the phone beeps softly to remind you that you still have a call on hold. The screen displays "Call Held" with the line number the call is held at the phone. Note: If you are connected to another call, the phone does not beep to remind you that you still have a call on hold. When on Hold To let your caller know that they are still on hold, music plays softly (if this has been set up for your system). The call/line appearance light for the line you are on remains solid to indicate that you are still connected. John 1051 01:17 Automatic Hold When juggling between calls, you do not have to press the hold key to go from one call to the next. The phone automatically puts your current call on hold as soon as you press a new line/call appearance key. If you have more than one call on hold, you can reconnect to a held call by pressing the line/call appearance key where that call is being held. Press to disconnect the call. 41-001380-00 REV01 - 06.2013 104