Aastra 7433ip Aastra 7433ip for MX-ONE, user guide

Aastra 7433ip Manual

Get Aastra 7433ip PDF manuals and user guides View all Aastra 7433ip manuals
Add to My Manuals
Save this manual to your list of manuals

Aastra 7433ip manual content summary:

  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 1
    U6D20/036S211E545R3G-DUBICDE433 01 CcHAXEKsaXACFtsteXBMatnXr/aiDnTaPeSletecnom Sweden AB Aastra 7433ip IP Phone for MX-ONE™ USER GUIDE
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 2
    in this file only for private use and not for redistribution. No parts of this publication may be subject to alteration, modification or commercial use. Aastra will not be liable for any damages arising from use of an illegal modified or altered publication. 6/1553-DBC 433 01 Uen D2 2014-03
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 3
    IP PHONE FOR MX-ONE™ 1 Important User Information TRADEMARK Aastra is a registered trademark of Aastra Technologies Limited. All other trademarks herein are the property of their respective owners. DISCLAIMER While every effort has been made to ensure accuracy, Aastra will not be liable for
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 4
    energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 5
    • Do not use the telephone to report a gas leak in the vicinity of the leak. • Use only the power cord indicated in this manual. SAVE THESE INSTRUCTIONS IMPORTANTES MESURES DE SÉCURITÉ (FRANÇAIS) Certaines mesures de sécurité doivent être prises pendant l'utilisation de matériel téléphonique afin de
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 6
    user procedures to handle the features available for the Aastra 7433ip to you. The phone supports Dynamic Host Configuration Protocol injury. Follow instructions in the equipment user guide or other , disconnect the product and contact qualified service personnel. • The handset's earcap region
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 7
    FOR MX-ONE™ thorized changes or modifications could void the user authority to operate the equipment. • Do not use the the product or auxiliary product. • Do not disassemble the product. Contact a qualified service agency when service or repair work is required. • Do not use a telephone (other than
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 8
    AASTRA 7433IP DESCRIPTION 2 Aastra 7433ip Description The Aastra 7433ip phone (see figure below) has a three line display with 2 soft keys and 2 : Clean the phone with a cloth slightly moistened with a mild soap solution. Figure 1: Aastra 7433ip Front View 6/1553-DBC 433 01 Uen D2 2014-03-26 8
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 9
    IP PHONE FOR MX-ONE™ 2.1 Cabling All connections at the back of the phone are marked for easier identification, see figure below. Aastra 7433ip Net Net PC Figure 2: Aastra 7433ip Back View 9 6/1553-DBC 433 01 Uen D2 2014-03-26
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 10
    AASTRA 7433IP DESCRIPTION Table 1 Phone Connections Type of Connection Description Power inlet The phone is powered by an external AC/DC adapter (see details below) or, alternatively,
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 11
    IP PHONE FOR MX-ONE™ Note: The phone does not work during power failure, unless powered through a PoE. The phone can be powered either from the network or from a 5 V AC/DC plug-in power adapter. Only use the plug-in adapter (power supply) listed below, or an adapter approved by your local retailer.
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 12
    AASTRA 7433IP DESCRIPTION 2. Press until you hear a click sound. 1 2 Note: If you wish to remove the foot console, pull the console firmly towards you to release it
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 13
    signal and incoming speech in the handset, or loudspeaker. Loudspeaker Pressing this key enables handsfree connection. Handsfree is not fully available. It is possible for a Aastra 7433ip user to hear the other party, but it is not possible for the other party to hear the
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 14
    AASTRA 7433IP DESCRIPTION Line keys The three line keys are available for both incoming and presentation, see 13 Settings on page 85. Note: All names and numbers presented in the displays in this user guide are examples. Idle phone (idle mode) When the phone is in idle mode, the display shows the
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 15
    the ongoing call is secure between the A and B party. The media (speech) and the signalling are encrypted. Access warning Flashes when the access to system services is reduced (some system services do not work). 15 6/1553-DBC 433 01 Uen D2 2014-03-26
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 16
    AASTRA 7433IP DESCRIPTION Display icon Description New missed call(s) Indicates new missed and not checked incoming call(s). The number beside the symbol indicates how many times this
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 17
    of the various menu options, please see the appropriate section in this manual. Note: Depending on the phone configuration, the menus in your the more... or Availability key. more... Availability Log off Log on Temporary user My Presence Follow-me External Follow-me My Profile My mobile
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 18
    AASTRA 7433IP DESCRIPTION Figure 5: Settings menu structure 6/1553-DBC 433 01 Uen D2 2014-03-26 18
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 19
    IP PHONE FOR MX-ONE™ 2.5.3 Contacts Pressing the key activates the Contacts menu. See figure below for a description of the menu structure. 2.5.4 19 Figure 6: Contacts menu structure Call List If there is a missed call, the lamp at the an information text in the display. key is flashing and
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 20
    2.5.5 AASTRA 7433IP DESCRIPTION Messages Pressing the key activates the Messages menu. See figure below for a description of the menu structure. 2.6 Figure 8: Messages menu structure Indicators Indicators on
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 21
    IP PHONE FOR MX-ONE™ 2.7 Tones and Signals It is possible to set different ring signals on the phone. For a description on how to change signals, see section 13.2.1 Changing Ring Signals for Incoming Calls on page 87. To distinguish between different call types, that is, internal, external and
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 22
    2.7.1.2 2.7.1.3 2.7.2 AASTRA 7433IP DESCRIPTION Note: The volume will return to the default level in case of a power failure. Mute Ring Signal To suppress the ring signal for an
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 23
    . Handset Mode The handset mode means that you lift the handset in order to make or answer a call. The features and processes described in this manual are 6/1553-DBC 433 01 Uen D2 2014-03-26
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 24
    It is not possible to make and answer calls without lifting the handset, but it is possible to monitor calls, see below. Monitoring With the Aastra 7433ip phone, it is possible to make and answer calls, and to monitor the progress of a call without lifting the handset, but you have to lift
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 25
    IP PHONE FOR MX-ONE™ • Busy Signal. The busy signal is activated in off-hook mode. Can be used to control a Do-not-disturb lamp at the door. • Extra Bell. The extra bell is activated parallel to the ring signal. • Combined Bell/Busy. A combined busy signal and extra bell. Steady active in off-hook
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 26
    AASTRA 7433IP DESCRIPTION Note: Unless the LAN cable is connected to the port marked Net on the option unit, the phone will not work. 5. Attach the ESD
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 27
    IP PHONE FOR MX-ONE™ 2.11 Wall Mounting The phone can be wall mounted. For detailed information on how to do this, please see the installation card which comes with the phone. 27 6/1553-DBC 433 01 Uen D2 2014-03-26
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 28
    , the startup procedure in your phone may differ from the one described in this manual. Check the display on your phone and read the applicable sections. Starting and Logging to the network, do the following: 1. Enter the user ID and press Log on. 2. Enter the password and press Log on. Note: If
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 29
    (or PIN code). Note: The PIN code can be changed by the user (see 13.7.1 Changing PIN Code on page 92), whereas the password can only the extension number or password is not accepted, the following message is displayed: "Failed User Log on! No calls!" Then make a new logon attempt. Should the logon
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 30
    allowed to log off the phone. This is the most common mode. Permanent User: The phone is always logged on with a default number. You cannot log screen when log off is allowed The last extension number used (by the previous user) remains until changed. To log on with your own extension number, do the
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 31
    password (or PIN code) and press Log On again. Note: All temporary users will be logged off from the phones at some point during night. 3.3 31 Phone If logging off the phone is allowed, the option Log off: [logged on user] appears when you press more.... To log off from the phone, do the following
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 32
    progress is displayed on screen. - When the update is successful, the phone reboots, and it is then ready to use, or ready for logon, see 3.2 User Type Modes on page 30. - If the update fails, the phone will use the old software version, and you can start using, or log on
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 33
    . 3.6 Free Seating Free seating is a feature that enables you to log on to your IP extension from any IP phone that allows temporary or free users by using your own extension number. This means that the IP phones automatically work as free seating phones within the network. Using the Free Seating
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 34
    PHONE Software Version To view which software version is installed currently, do the following: 1. Press . 2. Select Help and press Select. 3. Select About Aastra 7433ip and press Select. The software version is displayed. 4. Press Back to return to previous menu. 6/1553-DBC 433 01 Uen D2 2014-03
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 35
    IP PHONE FOR MX-ONE™ 4 Incoming Calls This chapter describes how to answer and reject incoming calls, how to pick up calls on other extensions, and how to check missed calls. 4.1 4.1.1 4.1.2 Receiving Calls An incoming call is indicated by a ring signal, and a flashing indicator associated with
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 36
    4.3 4.4 INCOMING CALLS Note: France and New Zealand, press 4; Sweden, press 6. Note: Some phones can be protected against call pick-up. Missed Calls If you have new missed calls in the call list, the call list key flashes. To check your missed calls, do the following: indicator 1. Press the
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 37
    IP PHONE FOR MX-ONE™ 4.5 Answering a Second Incoming Call You have three access lines ( , , ) for incoming and outgoing calls. All lines have the same extension number. This feature is called triple access line. To answer a second incoming call, do the following: 1. You have an ongoing call on
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 38
    4.6.1 4.6.1.1 4.6.1.2 4.6.2 INCOMING CALLS To answer a parallel ringing call, lift the handset on any of the ringing extensions. Disabling Parallel Ringing You can disable parallel ringing temporarily by activating Follow-me. Disabling On Your Phone To disable parallel ringing on one phone in the
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 39
    IP PHONE FOR MX-ONE™ 5 Outgoing Calls This chapter describes how to make outgoing calls, and lists the options available to you when you receive a busy tone or no answer. 5.1 Making Calls You can call both internal and external numbers from your phone. To dial an external number, you must first
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 40
    OUTGOING CALLS • If the internal number you have called is busy or does not answer. You can have several callbacks activated at the same time. • If all external lines are busy. You can have only one callback activated on a busy external line. Note: While waiting for a callback, you can make and
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 41
    IP PHONE FOR MX-ONE™ To answer a callback call, do the following: 1. Lift the handset. You will hear the ring tone. You have to answer within 8 seconds, otherwise the callback is cancelled. Note: If you have ordered callback for an external line, you may be prompted to enter any remaining digits. 2.
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 42
    OUTGOING CALLS the Call Waiting function key, you can order automatic Callback, see 5.2.1 Callback on page 39. 5.2.2.1 Activating Call Waiting To send a call waiting signal to the busy number, do the following: 1. Press more.... 2. Select CallWaiting, and press Select. 3. Keep handset off hook. If
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 43
    IP PHONE FOR MX-ONE™ 5.2.3 Intrusion You can intrude on an ongoing call on a busy extension. If intrusion is not allowed for the called extension, you will continue to hear a busy tone. Before the intrusion is executed, an intrusion tone is sent to the parties in the ongoing call. As long as the
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 44
    5.3.1 5.3.2 OUTGOING CALLS This section describes how to make emergency calls in different phone modes. The Phone Is Logged On • Dial the emergency number (SOS number). Wait for answer. The Phone Is Logged Off, With Emergency Call Feature Enabled When the emergency call feature is enabled, you can
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 45
    IP PHONE FOR MX-ONE™ 5.4 Redial Calls When you initiate an external call, the system automatically stores all the dialed digits, regardless of whether the call was successful or not. It is possible to redial the last dialed external number, or to choose a number from the call list. 5.4.1 Redial
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 46
    5.5.1 5.5.2 Speed Dialing Numbers To speed dial a number, do the following: 1) Lift the handset and wait for a dial tone. 2) Dial the speed dialing number. OUTGOING CALLS Speed Dialing Contacts To speed dial a contact, do the following: 1. Press and hold the key (2-9) that holds the first
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 47
    IP PHONE FOR MX-ONE™ for the current call, which means that the procedure has to be repeated the next time you want to use it. Note: This feature can be blocked for use on your extension. Contact the system administrator for more information. 5.7.1 Ordering Number Presentation Restriction To order
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 48
    6 6.1 6.1.1 6.2 6.2.1 During Calls DURING CALLS This chapter describes a number of features that you can activate during an ongoing call. Placing a call on hold, making a transfer, and starting a conference are a few examples. On Hold You can put an ongoing call on hold temporarily by pressing
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 49
    IP PHONE FOR MX-ONE™ 6.2.2 Switching Between Calls During inquiry you can switch between the ongoing call and the call on hold. To switch between calls, do the following: 1) Press the line key that holds a call. The call that was put on hold on that key is connected, and the other call is put
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 50
    to program your mobile phone number to be able to transfer a call to this number. See 13.1.5 My Mobile Phone on page 86) for instructions. Transfer to Operator To transfer an ongoing call to the operator, do the following: 1. Press more.... 2. Select Transfer to Operator, and press Select. Transfer
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 51
    IP PHONE FOR MX-ONE™ To leave the conference, replace the handset or press . 6.5 Suffix Dialing (DTMF) When communicating with and controlling a voice mail system, or when retrieving information about your bank account through your phone, you need to use Dual Tone Multi-Frequency (DTMF) signals,
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 52
    7 Call Forwarding CALL FORWARDING Call forwarding is useful when, for example, you are working temporarily from another room and want your calls to follow you to that room, or if you want your incoming calls to be forwarded to one of your contacts. 7.1 7.1.1 7.1.2 Internal Follow-me Internal
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 53
    this feature you can order follow-me of any extension number from any telephone. The prerequisite is that all the involved telephones have the right service profile. To order remote programming of follow-me, do the following: 6/1553-DBC 433 01 Uen D2 2014-03-26
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 54
    7.1.6 CALL FORWARDING 1. Lift the handset and wait for dial tone. 2. Dial *21*extension number to divert * extension number of the new answering position#. 3. Wait for special dial tone. 4. Replace the handset. Canceling Follow-me Remotely To cancel remote programming of follow-me from another
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 55
    you can order external follow-me of any extension number from any telephone. The prerequisite is that all the involved telephones have the right service profile. To order programming of external follow-me for another extension, do the following: 1. Lift the handset and wait for a dial tone. 2. Dial
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 56
    available. Contact your system administrator for more information When the feature is activated, incoming calls are transferred to your selected phones or backup services in the order that you choose. If an answering position in the profile is busy, the call can be transferred to another predefined
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 57
    IP PHONE FOR MX-ONE™ 5. Replace the handset. Note: If VoiceMail is included in the activated profile, make sure to always update your greeting with Absence Information. 7.3.4 Canceling a Profile From an External Phone The external phone must be of push button type provided with a pound key (#) and
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 58
    CALL FORWARDING • Make sure you use as few answering positions as possible for each profile. Profile examples: - In office - At home - Traveling - Absent/not reachable Example of how to fill in your settings form for search profiles: Table 3 Profile 1 - In office Search order Type of phone or
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 59
    IP PHONE FOR MX-ONE™ 8 Contacts This chapter describes how to manage contacts. When pressing the Contacts key , you can select your local Contacts or the Corporate directory. In this section you can also get information on how to copy your Microsoft® Outlook® contacts to your personal contacts,
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 60
    , see 14.3.1 Contacts Folder on page 98. Adding a New Contact To add a new contact, do the following: 1. Press . 2. Press more.... 3. Select Add new manual input, and press Select. 4. Enter a number, and press OK. If you make a typing mistake, press the volume down key or more... and select Erase or
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 61
    IP PHONE FOR MX-ONE™ country code number after a plus sign, for example +46 8 719 0000. 8.3 8.3.1 Editing a Contact This section describes how to edit a contact from the phone. It is also possible to edit a contact via the web interface, see 14.3.1 Contacts Folder on page 98. To edit a contact
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 62
    8.3.2 8.3.3 CONTACTS 3. Select Erase to erase one letter at the time, or Erase all to erase the whole entry. 4. Make the changes, and press OK. If you wish to edit the number or ring signal, press more.... 5. Press Done to save and return to the contact list. Editing the Number To edit a contact
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 63
    IP PHONE FOR MX-ONE™ 8.4 Deleting a Contact It is possible to delete a selected contact, or all contacts at once. 8.4.1 Deleting One Contact To delete a contact, do the following: 1. Press . 2. Select a contact and press more.... 3. Select Delete [contact] and press Select. A confirmation
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 64
    the type of directory server. The syntax above is valid for the Aastra CMG directory. Adding a Contact From the Corporate Directory To add ring signal, press more... and Edit number, Edit Name or Edit Ring. For instructions on how to change the ring signal, see section 8.3.3 Editing the Ring Signal
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 65
    list, do the following: 1. Start the My Dialog 4000 Contacts application by clicking the icon. 2. Enter your phone number, phone password, and the IP address to the phone. Note: You find the phone IP address by clicking , and selecting Help, About Aastra 7433ip, Phone IP Address. 3. Click OK. All
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 66
    CONTACTS The contacts are now available under in your phone. 6/1553-DBC 433 01 Uen D2 2014-03-26 66
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 67
    IP PHONE FOR MX-ONE™ 9 Presence Information Presence Information is used to inform callers if you are present or not, and when you will return if you are not in the office at the moment. Available absence reasons are, for example, Lunch, Busy, Vacation, Meeting and Trip. Callers are informed by
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 68
    9.2 PRESENCE INFORMATION Canceling Absence To remove an absence reason, do the following: 1. Press more.... 2. Select Disable all diversions, and press Select. OR 1. Press Availability. 2. Select My Presence. 3. Select Available. 6/1553-DBC 433 01 Uen D2 2014-03-26 68
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 69
    display. If a message is received during a call, a beep notifies the user. The lamp keeps flashing until you press the messages button. 10.1 10.1.1 . Contact the system administrator for more information and see separate instructions for the application. The Voice Mail application allows you to
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 70
    mail number should be configured to Call: "Not programmed! Program VoiceMail?" See 10.1.2 Programming VoiceMail Number on page 70. 3. Follow the recorded instructions. Note: The phone can be cpnfigured so that you can directly call the voicemail system by pressing without having to also select My
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 71
    the call, "Messages" still appears in the display, and the indicator is still flashing. You have to remove the MMW indication manually. To remove an MMW indication manually, do the following: 1. Press . New from [number or contact that left MMW] is selected. 2. Press more.... 3. Select Delete & Exit
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 72
    10.2.3 MESSAGES 3) Replace the handset. Canceling an MMW Indication To cancel a MMW indication that you have sent to another extension, do the following: 1) Lift the handset and wait for a dial tone. 2) Dial # 31 * extension number #. 3) Replace the handset. 6/1553-DBC 433 01 Uen D2 2014-03-26 72
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 73
    Group Features Most of the time, you will be working in a team, for example within a department. The telephony system and your phone offer services designed especially for working as a team. You have the possibility to supervise your colleague's extensions, ensuring call coverage. You can also call
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 74
    11.2 11.2.1 11.2.2 11.2.3 11.3 GROUP FEATURES Group Hunting An internal hunt group number is a common directory number for a group of extensions. Calls to the group will be indicated at a free extension in the group. Answering a Group Call A group call is answered in the normal way. Leaving a Group
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 75
    IP PHONE FOR MX-ONE™ 11.3.1 To Order Group Do Not Disturb A categorized extension can activate group do not disturb by dialling the following procedure: • Lift the handset (dial tone) • Dial *25*group number# (special dial tone) • Replace the handset 11.3.2 To Cancel Group Do Not Disturb A
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 76
    OTHER USEFUL FEATURES 12 Other Useful Features 12.1 12.1.1 12.1.2 Account Code The account code feature is used to charge a call to an account number or to prevent unauthorized calls from your phone. Account codes allows you to keep track of where different outgoing calls are charged. The
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 77
    Code Authorization codes are used to control or limit the access to an extension. When an extension is controlled by an authorization code, certain service profiles are not allowed to use certain features, such as making calls to other countries. If you dial the authorization code, you open up
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 78
    profile. • Authorization code dialing. The calling party may use other service profiles than those specified for the extension. • Changing of authorization code from the phone. This enables the user of the authorization code to change the code when suitable. 6/1553-DBC 433 01 Uen D2 2014-03-26
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 79
    hear a verification tone and the lock icon appears in the display, the extension is locked. If you wish to make a call from a locked phone, different service profiles will be used depending on whether you enter an authorization code or not. • If you do not enter an authorization code, the default
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 80
    has a direct in-dialing feature, enabling external subscribers to call you directly without having to go through the operator. Note: A call that is not serviced by a predefined extension can be rerouted to an operator or an alternate answering position. 6/1553-DBC 433 01 Uen D2 2014-03-26 80
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 81
    features are canceled with the general deactivation feature: • Callback. All callbacks are cancelled. • Follow-me and External follow-me • Manual Message Waiting • Flexible night service To request a general deactivation, do the following: 1) Lift the handset and wait for a dial tone. 2) Dial #001
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 82
    OTHER USEFUL FEATURES 1. Press Hold. 2. Dial *39#. A text message indicate whether the request has been accepted or rejected. 12.8 12.8.1 12.8.2 Direct Inward System Access (DISA) If you are assigned to use the Direct Inward System Access (DISA) feature and you are working externally, you can call
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 83
    delay. Details about external line numbers can be obtained from the operator. Note: Flexible night service is only available for manual lines. Activating flexible night service To activate flexible night service, do the following: 1) Lift the handset and wait for a dial tone. 2) Dial *84* route
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 84
    has been active for at least one hour). This way you do not have to be concerned about forgetting to deactivate the flexible night service for your extension. Individual Do Not Disturb (DND) You can activate this feature when you want to avoid incoming calls to your telephone. The calling
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 85
    IP PHONE FOR MX-ONE™ 13 Settings This section describes how to change settings for the phone. 13.1 13.1.1 13.1.2 13.1.3 85 My Availability Settings It is possible to specify availability status for: • My Presence • Follow-me • External follow-me • My profile • My mobile phone • Free on busy My
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 86
    13.1.4 13.1.5 13.1.6 13.2 SETTINGS 2. Select External Follow-me. 3. Enter the external access code and the phone number and press Done. My Profile To edit your profile number, do the following: 1. Press , select My Availability. 2. Select My Profile. 3. Enter the number of the profile (personal
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 87
    IP PHONE FOR MX-ONE™ 13.2.1 Changing Ring Signals for Incoming Calls A ring signal can be either a traditional ring signal or a melody that you download from a server. To change the ring signal for an incoming call, do the following: 1. Press . 2. Select Sounds and press Select. 3. Select Ring
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 88
    13.2.2 13.2.2.1 SETTINGS Alert Type With the Aastra 7433ip phone, it is possible to change the way the phone rings for incoming calls (1st call and 2nd or 3rd call), and for monitored extensions.
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 89
    IP PHONE FOR MX-ONE™ 2. Select Display and press Select. 3. Scroll to Phone Contrast and press Select. 4. Press the navigation keys, or the volume keys, to increase or decrease the contrast to a desired level. 5. Press Set and then Yes to confirm. Your setting is saved. 89 6/1553-DBC 433 01 Uen D2
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 90
    13.4 13.4.1 13.4.2 SETTINGS Language This section describes how to change language and character set on your phone. Note: There are several languages and character sets available for the phone. They are enabled by the system administrator. Display Menus To change the display menu language, do the
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 91
    IP PHONE FOR MX-ONE™ 13.5 Time and Date This section describes how to change the time and date format in the display. 13.5.1 Modifying Time Format To modify the time format, do the following: 1. Press . 2. Select Time & Date, and press Select. 3. Select Time Format, and press Select. 4. Use the
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 92
    13.6 13.7 13.7.1 SETTINGS Option Unit To modify the option unit settings, do the following: 1. Press . 2. Select Option Unit, and press Select. Note: Option Unit is available only when an option unit is installed. 3. Select Busy signal, Extra bell, or Combined Bell/Busy, and press Select. In
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 93
    IP address, and the phone web address. To find this information, do the following: 1. Press . 2. Scroll to Help, and press Select. About Aastra 7433ip is displayed. 3. Press Select. Software version is displayed. 4. Select Phone IP Address and press Select to see the IP address. 5. Select Phone Web
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 94
    information. Phone IP Address To find out the IP address of the phone, do the following: 1. Press . 2. Select Help and press Select. About Aastra 7433ip is displayed. 3. Press Select. 4. Select Phone IP Address, and press Select. The IP address is displayed. 5. Press to return to idle mode. 6/1553
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 95
    administrator for more information. To find out the web address of the phone, do the following: 1. Press . 2. Select Help and press Select. About Aastra 7433ip is displayed. 3. Press Select. 4. Select Phone Web Address, and press Select. The web address is displayed. 5. Press to return to idle mode
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 96
    14.3 WEB INTERFACE Using the Web Interface To use the phone through the web interface, do the following: 1. Enter the phone web address or IP address in the address field of your web browser. 2. Enter your password (or PIN code) and click Log on. Use the same password (or PIN code) as you use to
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 97
    IP PHONE FOR MX-ONE™ 97 6/1553-DBC 433 01 Uen D2 2014-03-26
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 98
    3. Expand the folder(s) to start edit data. WEB INTERFACE 14.3.1 14.3.1.1 To exit the web interface of the phone, press Log off. Contacts Folder Click Contacts to see a list of the contacts stored in your phone. If you expand the Contacts folder, you can add and delete contacts. Adding a Contact
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 99
    IP PHONE FOR MX-ONE™ 14.3.1.2 Editing or Deleting a Contact To edit or delete a name and number, do the following: 1. Click Contacts. 2. Click the name to edit or delete. 3. Do any of the following: • Make the changes and click Save to save. • Click Delete to delete the current name and number. •
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 100
    14.3.2.2 14.3.3 14.3.4 WEB INTERFACE Deleting All Names And Numbers To delete all names and numbers from the call list, do the following: 1. Expand Call List. 2. Click Delete call list. A confirmation message is displayed. 3. Click OK to delete the call list. Settings - Sounds To change the hearing
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 101
    Troubleshooting This section contains information on how to solve common operational problems, and warnings you may receive. Go through the following list if you encounter any problems. If this checklist does not cover the problem making calls. If the trouble persists, contact the system
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 102
    OF FEATURES AND PROCEDURES 16 List of Features and Procedures Table 5 Features and Procedures summarizes the procedures available for the Aastra 7433ip phone. Table 5 Features and Procedures Features ACCOUNT CODE AUTHORIZATION CODE Common code: increase CoS lock extension unlock extension
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 103
    IP PHONE FOR MX-ONE™ CALL PICK UP - individual Press key 8 - group *8# CALL WAITING - not applicable COMMON SPEED DIALING NUMBERS see List of speed dialing numbers CONFERENCE Press soft key EXTERNAL FOLLOW-ME - to order *22# route access code and external number # - to cancel #
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 104
    INQUIRY - to initiate - to revert to original party INTRUSION LAST EXTERNAL NUMBER REDIAL MANUAL MESSAGE WAITING - to order - to cancel - to reply NIGHT SERVICE Universal Flexible - to order - to cancel NUMBER PRESENTATION RESTRICTION RESTART SOFTWARE VERSION LIST
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 105
    IP PHONE FOR MX-ONE™ TRANSFER Press soft key 105 6/1553-DBC 433 01 Uen D2 2014-03-26
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 106
    Codes This section describes the country specific suffix digits and feature codes used in MX-ONE that are relevant for the Aastra 7433ip IP phone. The following application systems are concerned: Australia, Austria, Belgium, Brazil, China, Denmark, Export, Finland, France, Germany, Hong Kong A-law
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 107
    Number) Follow Me 21 External Follow Me 22 Ordering or Cancellation of 23 Interception Message Print Interception Message 26 Manual Message Waiting 31 Cancellation of Message 31 Waiting Automatic Call Back, 37 Cancellation Malicious Call Tracing 39 Calling Line Identification
  • Aastra 7433ip | Aastra 7433ip for MX-ONE, user guide - Page 108
    Customer Identity Storage 77 Answer on Group Call 8 Pick-up, and Answer on Night Time Connection (* and # in the service code can be excluded) Ordering of Night Time 84 Connection Repetition of the Last *** External Number Dialed SUFFIX DIGITS AND FEATURE CODES Finland: 0 North America:
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
USER GUIDE
USER GUIDE
6/1553-DBC 433 01
D2
2014
03
26
Aastra 7433ip
IP Phone for MX-ONE™
Catarina Sten
csten
HF
Aastra Telecom Sweden AB
XXX
XXXX
HF
EAB
KCM/DP