Aastra 7433ip Aastra 7433ip for MX-ONE, user guide - Page 29
Logging On To the System
View all Aastra 7433ip manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
IP PHONE FOR MX-ONE™ 5. If a new software version is available, you will be notified via a display message. 3.1.2 Logging On To the System When the phone is logged on to the network, there are three possible scenarios: • The phone is ready to use. This means that the phone logs on automatically to the telephony system. • You have to log on the phone to the telephony system with an extension number. • You have to log on the phone to the telephony system with both an extension number and password (or PIN code). Note: The PIN code can be changed by the user (see 13.7.1 Changing PIN Code on page 92), whereas the password can only be set by the system administrator. If you are required to log on the phone to the telephony system, you are prompted to enter your extension number, or your password (or PIN code), or both. To log on to the telephony system, do the following: 1. Enter your extension number and press Log on 2. Enter the password (or PIN code), if required, and press Log on again. Note: If the extension number or password is not accepted, the following message is displayed: "Failed User Log on! No calls!" Then make a new logon attempt. Should the logon fail again, please contact the system administrator. The phone does not work during power failure. After a power failure the phone automatically restarts. When the phone is starting up (rebooting), any PC that is connected to the phone will loose its network connection for about 10 seconds. 29 6/1553-DBC 433 01 Uen D2 2014-03-26