Aastra 7433ip Aastra 7433ip for MX-ONE, user guide - Page 92
Option Unit, Security and Access
View all Aastra 7433ip manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
13.6 13.7 13.7.1 SETTINGS Option Unit To modify the option unit settings, do the following: 1. Press . 2. Select Option Unit, and press Select. Note: Option Unit is available only when an option unit is installed. 3. Select Busy signal, Extra bell, or Combined Bell/Busy, and press Select. In section 2.10 Option Unit on page 24, you will find the detailed information about the option unit and how to install it. Security and Access It is possible to view and change the PIN code, if this option has been configured by system administrator. Changing PIN Code You can change the PIN code used for logging on to the telephony system. Note: Depending on the phone configuration, the menu option Changing PIN may not be available. To change the PIN code, do the following: 1. Press . 2. Select Security and Access, and press Select. 3. Select Change PIN and press Select. 4. Enter the current PIN code, and press OK. You will be prompted for a new PIN (1-7 digits). 5. Enter your new code, and press OK. Note: Only digits can be used as PIN. 6. Enter the new code again for confirmation, and press OK. 6/1553-DBC 433 01 Uen D2 2014-03-26 92