Aastra Dialog 4223 Dialog 4223 Professional for MD Evolution, user guide - Page 28

Operations for Outgoing Calls Voice Paging over a Free Extension's Loudspeaker When you call an internal extension that is "FREE", but does not answer, you may broadcast a voice page on your called extension's loudspeaker. This allows you to transmit a message on the extension's loudspeaker, which will be automatically activated when you request this service. The service is available when you attempt to contact an extension that is equipped with a loudspeaker. Otherwise, the service will be refused, and the call will continue normally. VPAGING d í or To activate the service: L1 SMITH Peter-405 FREE DTMF VPAGING CALL_BACK FLASH > Press the dynamic function key shown on the left. You may broadcast your message to be heard over the called extension's loudspeaker. Replace the handset or press the "C" key to end the call in handsfree mode. Notes: Typically, the time limit for this service is 20 seconds. When this time limit expires, your extension will be automatically disconnected, unless the called party picks up their extension, at which time the call will proceed normally. The announcement may be unidirectional from your extension. It may also be bi-directional, in which case the called extension's microphone is automatically activated at the same time as his/her loudspeaker. In the second case, your called party can answer you without lifting their handset. This depends on your called party's extension settings. See also the "Programming Your Extension" section. Certain extensions (such as yours) may possibly be equipped with permanent protection against voice paging. Obviously, this service will be denied on these extensions (and viceversa). 28 MD Evolution - Dialog 4223 Professional