Adaptec 5325302057 User Guide - Page 84
Modifying an Auto-discovery Control List, Repeat Steps 4 to 8 to add more initiators, if required.
![]() |
UPC - 753253020577
View all Adaptec 5325302057 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Limiting Discovery of iSCSI Targets with Auto-discovery Control Lists Modifying an Auto-discovery Control List 1 In the Enterprise View, click the iSCSI Storage Appliance you want. 2 In the Logical Devices View, right-click the words 'Logical devices', then select Modify logical devices. Right-click here The wizard opens. See the figures in "Provisioning Storage Manually" on page 42 for more information. 3 At the top of the wizard, click the tab of the pool you want, then click Next. The next screen of the wizard opens. 4 Click Add Initiator. The Add iSCSI Initiator window opens. 5 Enter the IQN (iSCSI Qualified Name) assigned to the iSCSI initiator installed on your system. 6 Enter a name (or alias) for the initiator. The name must begin with an alphabetic character, and can contain only letters and numbers. 7 (Optional-Advanced users only) Click Advanced settings to enable or disable Protocol Data Unit and iSCSI ping settings. Note Refer to your iSCSI initiator's documentation for more information about the advanced settings. 8 Click OK. The iSCSI initiator appears in the Initiators drop-down menu. 9 Repeat Steps 4 to 8 to add more initiators, if required. 10 From the Initiators drop-down menu, select the initiator you want. 11 From the list of logical devices, select the logical device(s) that you want the selected initiator to discover, then click the right arrow (>). If you want the selected initiator to discover all the logical devices, click the double right arrows (>>). 12 Repeat Steps 10 and 11 for each iSCSI initiator. Note Each logical device can support up to 32 iSCSI initiators. 78 Snap Server 700i Series User's Guide
![](/manual_guide/products/adaptec-5325302057-user-guide-dd7754a/84.png)