Adaptec 5325302057 User Guide - Page 86

Limiting User Access to Your IP SAN with the Security Manager Modifying the Authentication Settings You can add authentication, change authentication methods, or remove authentication from any provisioned volume or logical device. You can change the access settings for any provisioned volume or logical device. To change an authentication setting: 1 In the Logical Devices View, right-click the words Logical devices, then select Modify logical devices. Right-click here The wizard opens. 2 Change the authentication settings as required. (For more detailed instructions, see Step 7 of "Provisioning Storage Manually" on page 42.) 3 Click Next to continue, click Next again, then review the configuration summary. Click Back to change the configuration. 4 Click Apply, then click Yes. The authentication settings are modified. Limiting User Access to Your IP SAN with the Security Manager To protect your IP SAN, you can use Adaptec Storage Manager's Security Manager to control which users can access and modify your iSCSI storage. Each Adaptec Storage Manager user is given a password and is assigned one of two access privilege levels, Administrator level or Operator level (see page 81). To access Adaptec Storage Manager and your IP SAN, the user enters his or her password when logging in to the Management Service (see Step 2 on page 35). Note Multiple users can be logged into the same Management Service at the same time. A user is associated with a specific Management Service. If your IP SAN includes more than one Management Service, you can: • Add the same user to all Management Services, or limit that user to specific Management Services only. • Assign the same user different privilege levels on different Management Services. 80 Snap Server 700i Series User's Guide