Adaptec 5325302057 User Guide - Page 99

Creating and Modifying Pools Resetting Authentication on Imported Logical Devices If authentication was set on any logical devices before you exported the pool, it must be reset once the pool is imported. To reset authentication: 1 In the Enterprise View, select the iSCSI Storage Appliance you want. 2 In the Logical Devices View, right-click the words 'Logical devices', then select Modify logical devices. Right-click here The wizard opens to the Define Logical Devices screen. 3 At the top of the wizard, click the tab of the pool you want. The logical devices for that pool are displayed. 4 (Optional) Click inside the Authentication box next to a logical device and select the authentication method. Note If possible, re-use the authentication settings that were set before you moved the pool. If the pool contains automatically provisioned volumes, use new authentication settings. (You must also reconfigure your iSCSI Storage Hosts with these new settings.) • If you select CHAP-Click Set CHAP secret, enter a user name and password, then click Add. Click Cancel to close the window. Note If you are using CHAP with the Microsoft iSCSI initiator, the CHAP password must be 12-16 characters long or it will be rejected by the iSCSI initiator. • If you select SRP-Click inside the Scope field to type a unique name for the scope, or choose an existing name from the drop-down menu. 5 Click Next, click Next again, then review the configuration summary. 6 Click Apply, then click Yes. The new settings are saved in the iSCSI Storage Appliance. Chapter 8 Modifying Your iSCSI Storage 93