Alcatel OS6850-P48 User Guide - Page 139
Installing Power Supplies, Connecting a Power Supply Directly to the Chassis, Anti-Static Warning.
View all Alcatel OS6850-P48 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
OmniSwitch 6850/6850E Series Power Supplies OmniSwitch 6850/6850E Series Power Supplies Installing Power Supplies Power supply can be installed in the following ways: • As a primary or backup supply directly connected to the back of a chassis. See "Connecting a Power Supply Directly to the Chassis" on page 4-11 for more information. • As a primary or backup supply connected with a cable. See "Connecting a Power Supply with a Cable" on page 4-12 for more information. DC power supplies require additional installation steps. See "DC Power Supply Considerations" on page 4-16 for more information. Anti-Static Warning. Before handling any components, free yourself of static by wearing a grounding strap, or by grounding yourself properly. Static discharge can damage the switch and the backup power supply. Connecting a Power Supply Directly to the Chassis Follow the steps below to connect a power supply directly (i.e., without a cable) to the back of the OmniSwitch: 1 Place the chassis and power supply on a smooth, clean, and dry surface. 2 Optional. Follow steps a and b to install the power shelf. a Carefully slide the power shelf so that it is flush against the back of the chassis. b Tighten the two captive screws located on the left and right sides of the power shelf. OmniSwitch 6850/6850E Series Hardware Users Guide June 2011 page 4-11