Alcatel OS6850-P48 User Guide - Page 58

OmniSwitch 6850-P24 OmniSwitch 6850 Series Chassis and Hardware Components Refer to the illustration below for more front panel information. For detailed LED descriptions, refer to page 2-53. For information on the chassis rear panel, refer to page 2-55. USB Port High speed USB port, which can be used for quick upgrades. Status and Slot Indicator LEDs For information on the OS6850-P24's status and slot indicator LEDs, refer to page 2-53. OmniSwitch 6850-P24 USB OK PRI PWR BPS 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Console 21 22 23 24 CLASS 1 LASER PRODUCT Console Port The OS6850-P24 front panel provides one RJ-45 port for console connections. Console connections are used by network administrators for switch management. This female RJ-45 connector provides a DTE console connection. 10/100/1000Mbps PoE The OS6850-P24 provides 20 fixed 10/100/1000BaseT non-combo PoE (1-20) and 4 fixed 10/100/1000BaseT combo PoE (21-24). These are auto-sensing and auto-MDIX and use RJ-45 connectors. Combo SFP The OS6850-P24 provides four combo SFP connectors for 1000Base-X high- speed connections. By default, when an SFP is installed in a combo port, it takes over the port number of the corresponding RJ-45 Ethernet port. In other words, if an SFP is installed in the slot labeled 24, Ethernet port 24 would no longer be available and cannot be used for 10/100/1000 traffic. This default setting is referred to as "preferred fiber." Refer to "Configuring Ethernet" in the Network Configuration Guide for detailed information, including steps for configuring combo port settings. OmniSwitch 6850-P24 Front Panel page 2-38 OmniSwitch 6850/6850E Series Hardware Users Guide June 2011