Alcatel OS6850-P48 User Guide - Page 31

OmniSwitch 6850 Series Chassis and Hardware Components OmniSwitch 6850-P24L Refer to the illustration below for more front panel information. For detailed LED descriptions, refer to page 2-53. For information on the chassis rear panel, refer to page 2-55. USB Port High speed port, which can be used for quick upgrades. Status and Slot Indicator LEDs For information on the OS6850-P24L's status and slot indicator LEDs, refer to page 2-53. OmniSwitch 6850-P24L OK PRI PWR BPS USB 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Console 21 22 23 24 CLASS 1 LASER PRODUCT Console Port 10/100 Mbps and 10/100/1000Mbps PoE The OS6850-P24L front panel The OS6850-P24L provides 20 fixed provides one RJ-45 port for con- 10/100BaseT non-combo PoE (1-20) and 4 sole connections. Console con- fixed nections are used by network 10/100/1000BaseT combo PoE (21-24). administrators for switch man- These are auto-sensing and auto-MDIX agement. This female RJ-45 con- and use RJ-45 connectors. nector provides a DTE console connection. Combo SFP The OS6850-P24L provides four combo SFP connectors for 1000Base-X highspeed connections. By default, when an SFP is installed in a combo port, it takes over the port number of the corresponding RJ-45 Ethernet port. In other words, if an SFP is installed in the slot labeled 24, Ethernet port 24 would no longer be available and cannot be used for 10/100/1000 traffic. This default setting is referred to as "preferred fiber." Refer to "Configuring Ethernet" in the Network Configuration Guide for detailed information, including steps for configuring combo port settings. OmniSwitch 6850-P24L Front Panel OmniSwitch 6850/6850E Series Hardware Users Guide June 2011 page 2-11