Apple Macbook Pro Aluminum 13-Inch Black Laptop Keyb Technical Guide - Page 17

General Information Required Tools Caution: To prevent scratches or other cosmetic damage to the computer housing, use a soft cloth as a protective layer when removing and installing the external screws. The following tools are required to service the computer: • Clean, soft, lint-free cloth • ESD wrist strap and mat • Magnetic Phillips #0 screwdriver • Magnetic Phillips #00 screwdriver (preferably with a long handle) • Torx T6 screwdriver • Black stick (Apple probe tool, part number 922-5065) or other nonconductive nylon or plastic flatblade tool • Tri-lobe Large #0 driver (Apple part number 922-8991) for trackpad replacement • Tri-lobe Small #00 driver (Apple part number 922-9013) for trackpad replacement • Torx T5 screwdriver from regional supply vendor for trackpad replacement • EMI-safe plastic or nylon tweezers for installing flex cables (optional) • Thermal grease (Apple thermal compound syringe, part number 922-7144) • Alcohol wipes • Permanent marking, felt-tip pen (optional) • Pencil with eraser • Foam wedge fixture for display assembly removal (Apple part number 922-8779) • Kapton tape • Digital volt meter (troubleshooting) Refer to Knowledge Base article "Hand Tools for Desktop and Portable Repairs--AP/CA/EU/JP/ LA/US" to purchase tools: http://docs.info.apple.com/article.html?artnum=500200 In addition, the following software programs are required for troubleshooting: • Apple Service Diagnostic (ASD), version 3S125 or later • Apple Hardware Test, version 3A148 or later 2010-06-15 MacBook (13-inch, Aluminum, Late 2008) Basics - General Information 17