Apple Macbook Pro Aluminum 13-Inch Black Laptop Keyb Technical Guide - Page 197
Removal, Replacement, Install screws
UPC - 005215163007
View all Apple Macbook Pro Aluminum 13-Inch Black Laptop Keyb manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 197 highlights
Removal 1 Remove 2 (7-mm) 922-8645 screws. 2 Tilt out MagSafe board. Replacement 1 Make sure MagSafe cable is routed away from screw standoff, as shown. 2 Important: Connect unplugged external power adapter cable to MagSafe port to make sure port stays completely aligned in top case. 3 Install screws to MagSafe board before installing logic board. 4 With computer fully assembled, test power with power cable. 2010-06-15 MacBook (13-inch, Aluminum, Late 2008) Take Apart - MagSafe Board 197
MacBook (13-inch, Aluminum, Late 2008) Take Apart — MagSafe Board
197
2010-06-15
Removal
1
Remove 2 (7-mm)
922-8645 screws.
2
Tilt out MagSafe board.
Replacement
1
Make sure MagSafe
cable is routed away
from screw standoff, as
shown.
2
Important:
Connect
unplugged external
power adapter cable
to MagSafe port to
make sure port stays
completely aligned in
top case.
3
Install screws to
MagSafe board before
installing logic board.
4
With computer fully
assembled, test power
with power cable.