Asus M4N98TD EVO User Manual - Page 103
Setting the RAID item in BIOS, NVIDIA
View all Asus M4N98TD EVO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
4.4.3 Setting the RAID item in BIOS You must enable the RAID function in the BIOS Setup before creating RAID set(s) using SATA HDDs. To do this: 1. Enter the BIOS Setup during POST. 2. Go to the Main menu > Storage Configuration, and then press . 3. Set the SATA Mode select item to [RAID Mode]. 4. Save your changes, and then exit the BIOS Setup. Refer to Chapter 3 for details on entering and navigating through the BIOS Setup. When set any of SATA ports to RAID mode, all SATA ports run at RAID mode together. 4.4.4 NVIDIA® MediaShield BIOS RAID configurations To enter the NVIDIA® MediaShield BIOS RAID utility 1. Boot up your computer. 2. During POST, press to display the main menu of the utility. MediaShield BIOS Aug 18 2008 - Define a New Array - RAID Mode: Mirrored Striping Block: Optimal Free Disks Port Disk Model Capacity Array Disks Port Disk Model Capacity 0.0. 0.2. 0.1. 0.3. ST3160812AS 149.04GB ST3160812AS 149.04GB [→] Add ST3160812AS 149.04GB ST3160812AS 149.04GB [←] Del [ESC] Quit [F6] Back [F7] Finish [TAB] Navigate [↑↓] Select [ENTER] Popup The navigation keys at the bottom of the screen allow you to move through the menus and select the menu options. The RAID BIOS setup screens shown in this section are for reference only and may not exactly match the items on your screen. Chapter 4 ASUS M4N98TD EVO 4-13