Asus NCCH-DLE NCCH-DLE User's Manual English version 1.0 - Page 147
Use the FDISK utility to format the array as a single hard drive.
View all Asus NCCH-DLE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
6. When prompted, use the arrow keys to select the source disk, then press . 7. When prompted to start the duplication process, press to continue; otherwise, press to abort the operation. 8. After you have created the RAID 1 set, press any key to reboot the system. During POST, the FastTrak S150 TX4™ BIOS checks and displays the disk array information. 9. Use the FDISK utility to format the array as a single hard drive. 10. After you have formatted the arrayed drives, install an operating system (OS). The OS will treat the RAID 1 array as a single drive unit. ASUS NCCH-DLE 5-35
ASUS NCCH-DLE
ASUS NCCH-DLE
ASUS NCCH-DLE
ASUS NCCH-DLE
ASUS NCCH-DLE
5-35
5-35
5-35
5-35
5-35
6.
When prompted, use the arrow keys to select the source disk, then
press <Enter>.
7.
When prompted to start the duplication process, press <Y> to
continue; otherwise, press <N> to abort the operation.
8.
After you have created the RAID 1 set, press any key to reboot the system.
During POST, the FastTrak S150 TX4™ BIOS checks and displays the
disk array information.
9.
Use the FDISK utility to format the array as a single hard drive.
10.
After you have formatted the arrayed drives, install an operating
system (OS). The OS will treat the RAID 1 array as a single drive unit.