Asus NCCH-DLE NCCH-DLE User's Manual English version 1.0 - Page 47

2 . Serial ATA connectors (7-pin SATA1, SATA2) These next generation connectors support the thin Serial ATA cables for Serial ATA hard disks. The current Serial ATA interface allows up to 150 MB/s data transfer rate, faster than the standard parallel ATA with 133 MB/s (Ultra ATA/133). If you installed Serial ATA hard disks, you may create a RAID 0/RAID 1 configuration using the RAID feature of the Intel® 6300ESB ICH. Refer to page 4-19 for the SATA configuration. SATA2 GND RSATA_TXP2 RSATA_TXN2 GND RSATA_RXN2 RSATA_RXP2 GND NCCH-DLE ® SATA1 GND RSATA_TXP1 RSATA_TXN1 GND RSATA_RXN1 RSATA_RXP1 GND NCCH-DLE SATA connectors 3 . USB connector (10-1 pin P1, P2) These connectors are for USB 2.0 ports. Connect the 4-port USB module cables to these connectors, then install the module to the opening at the front of the system chassis. The USB connectors comply with USB 2.0 specification that supports up to 480 Mbps connection speed. The connector P1 is for front USB ports 5 and 6; P2 is for front USB ports 7 and 8. GND USB_P7+ USB_P7USB+5V GND USB_P5+ USB_P5USB+5V NCCH-DLE ® 1 1 P1 P2 NCCH-DLE USB 2.0 connectors NC GND USB_P8+ USB_P8USB+5V NC GND USB_P6+ USB_P6USB+5V ASUS NCCH-DLE 2-27