Asus P3V133 P3V133 User Manual - Page 26

Installing the Processor

Get Asus P3V133 PDF manuals and user guides View all Asus P3V133 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

3. H/W SETUP CPU 3. HARDWARE SETUP 3.6.4 Installing the Processor NOTE: The following steps assume that you have already attached the heatsink and installed the URM into your motherboard. 1. Make sure that the processor substrate key is aligned with the Slot 1 connector key. Connector Key Substrate Key 2. Push down firmly but gently the SECC2/SECC/SEPP into the URM until it snaps into place. NOTE: The processor edge fingers must be kept parallel to the connector or else misalignment will occur. SECC for Pentium II only: Secure the SECC in place by pushing the two SECC locks outward so that the locks show through the retention mechanism's lock holes. SECC2/SEPP: When engaged, the T-bars lock into the slots at the two ends of the SECC2/SEPP heatsink. SECC SECC2/SEPP Lock hole CPU fan cable to fan connector Lock hole CPU fan cable to fan connector Locked Position (push upward) 26 ASUS P3V133 User's Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
26
ASUS P3V133 User’s Manual
3. HARDWARE SETUP
CPU
3. H/W SETUP
3.6.4
Installing the Processor
NOTE:
The following steps assume that you have already attached the heatsink and
installed the URM into your motherboard.
1.
Make sure that the processor substrate key is aligned with the Slot 1 connector key.
Substrate Key
Connector Key
Locked Position
(push upward)
SECC
SECC2/SEPP
CPU fan cable to
fan connector
CPU fan
cable to fan
connector
Lock hole
Lock hole
2.
Push down firmly but gently the SECC2/SECC/SEPP into the URM until it
snaps into place.
NOTE:
The processor edge fingers must be kept parallel to the connector or else
misalignment will occur.
SECC for Pentium II only:
Secure the SECC in place by pushing the two SECC
locks outward so that the locks show through the retention mechanism’s lock holes.
SECC2/SEPP:
When engaged, the T-bars lock into the slots at the two ends of
the SECC2/SEPP heatsink.