Asus P3V133 P3V133 User Manual - Page 28
ASUS Smart Thermal Solutions
View all Asus P3V133 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
3. HARDWARE SETUP 3.6.7 ASUS Smart Thermal Solutions ASUS provides two smart solutions to Slot 1 CPU thermal problems: the ASUS Smart Fan or ASUS S-P2FAN and the ASUS P2T-Cable. ASUS S-P2FAN The optional ASUS Smart Fan or ASUS S-P2FAN is a CPU fan for a Thermal Sensor Pentium® II processor packaged in Cable CPU Fan Cable Rock Arm an SECC. Unlike other CPU thermal solutions, the ASUS S-P2FAN has an integrated thermal sensor located near the center of the CPU heat source. The sensor is optimized by ASUS to give the most accurate reading of the CPU temperature, thus provides the best protection to your computer system. To Use the ASUS S-P2FAN See 3.6.2 Attaching the Heatsink for the relevant procedures. Note that the S-P2FAN comes with a rock arm design for easy FAN/CPU installation. ASUS P2T-Cable The optional ASUS P2T-Cable can be used for a Pentium® III / II processor packaged in an SECC/SECC2 or a Celeron™ processor packaged in an SEPP. Sensor Sensor Connector Plug WARNING! Do not insert the sensor between the processor and heatsink, otherwise, it will cause damage to the P2T-Cable. To Use the ASUS P2T-Cable 1. Simply peel off the tab from the sensor and then stick the sensor near the middle edge of the Intel boxed processor heatsink with fan (middle) or to either the upper or lower edge of the Celeron™ heatsink (right). 2. Connect the P2T-Cable to the CPU thermal sensor connector (JTCPU). 3. H/W SETUP CPU CPU Thermal Sensor JTCPU P3V133 R Power Supply Thermal Sensor JTPWR P3V133 Thermal Sensor Connectors 28 ASUS P3V133 User's Manual