Asus Pundit P2-PE2 Pundit-PE2 User''s Manual for English Edition - Page 20

2.4 Installing a hard disk drive (HDD) The system supports one UltraATA133 IDE hard disk drive (HDD). To install a hard disk drive: 1. Remove the two metal cover screws. Keep the screws for later use. 1 2. Use the metal cover handle to slide the cover A toward the rear panel until the side hooks disengage from the HDD metal tray and optical drive shield tabs. Side hooks Lift the metal cover, then set aside. B Side hooks Handle Set your hard disk drive as Master device before connecting the IDE cable and power plug. Refer to the HDD documentation on how to set the drive as Master device. 3. Connect the 40-pin IDE cable to the IDE connector on the drive. 4. Connect the 4-pin power plug to the HDD power connector. 3 4 2-4 Chapter 2: Basic installation