Asus Pundit P2-PE2 Pundit-PE2 User''s Manual for English Edition - Page 63

Cylinders Configures the number of cylinders. Refer to the drive documentation to determine the correct value. Head Configures the number of read/write heads. Refer to the drive documentation to determine the correct value. To make changes to this field, set the IDE Primary Master field to [Manual] and the Access Mode to [CHS]. Sector Configures the number of sectors per track. Refer to the drive documentation to determine the correct value. CHS Capacity This field shows the drive's maximum CHS capacity as calculated by the BIOS based on the drive information you entered. Maximum LBA Capacity This field shows the drive's maximum LBA capacity as calculated by the BIOS based on the drive information you entered. PIO Mode Sets the PIO mode. Configuration options: [Auto] [Mode 0] [Mode 1] [Mode 2] [Mode 3] [Mode 4] Ultra UDMA Mode Sets the Ultra UDMA transfer mode. Configuration options: [Disabled] [Auto] After entering the IDE hard disk drive information into BIOS, use a disk utility, such as FDISK, to partition and format new IDE hard disk drives. This is necessary so that you can write or read data from the hard disk. Make sure to set the partition of the Primary IDE hard disk drives to active. ASUS Pundit-PE2 5-15