Asus Pundit P2-PE2 Pundit-PE2 User''s Manual for English Edition - Page 61
Primary and Secondary Master/Slave
View all Asus Pundit P2-PE2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
5.3.1 Primary and Secondary Master/Slave Type [Auto] Select [Auto] to automatically detect an IDE hard disk drive. If automatic detection is successful, setup automatically fills in the correct values for the remaining fields on this sub-menu. If automatic detection fails, this may be because the hard disk drive is too old or too new. If the hard disk was already formatted on an older system, setup may detect incorrect parameters. In these cases, select [User Type HDD] to manually enter the IDE hard disk drive parameters. Refer to the next section for details. Before attempting to configure a hard disk drive, make sure you have the correct configuration information supplied by the drive manufacturer. Incorrect settings may cause the system to fail to recognize the installed hard disk. Multi-Sector Transfers [Maximum] Automatically sets the number of sectors per block to the highest number that the drive supports. When this field is automatically configured, the set value may not always be the fastest value for the drive. Refer to the documentation that came with the hard drive before setting this item to the optimum value. Configuration options: [Disabled] [2 Sectors] [4 Sectors] [8 Sectors] [16 Sectors] [32 Sectors] [Maximum] ASUS Pundit-PE2 5-13