Asus T2-P T2-P User Manual - Page 117

Power On By PCI Devices [Disabled] When set to [Enabled], this parameter allows you to turn on the system through a PCI LAN or modem card. This feature requires an ATX power supply that provides at least 1A on the +5VSB lead. Configuration options: [Disabled] [Enabled] Power On By RTC Alarm [Disabled] Allows you to enable or disable RTC to generate a wake event. When this item is set to Enabled, the items RTC Alarm Date, RTC Alarm Hour, RTC Alarm Minute, and RTC Alarm Second appear with set values. Configuration options: [Disabled] [Enabled] 5.5.6 Hardware Monitor Hardware Monitor CPU Temperature MB Temperature [44°C/111°F] [36°C/96.5°F] CPU Fan Speed Chassis Fan Speed [5234RPM] [N/A] VCORE Voltage 3.3V Voltage 5V Voltage 12V Voltage [1.808V] [3.376V] [5.080V] [11.977V] SMART Q-Fan Function [Enabled] Fan Auto Start Voltage [5.0V] Fan Auto Mode Start Temp [30°C] Fan Auto Mode Full Speed Temp [70°C] CPU temperature. CPU Temperature [xxxºC/xxxºF] MB Temperature [xxxºC/xxxºF] The onboard hardware monitor automatically detects and displays the motherboard and CPU temperatures. Select [Disabled] if you do not wish to display the detected temperatures. CPU Fan Speed [xxxxRPM] or [N/A] Chassis Fan Speed [xxxxRPM] or [N/A] The onboard hardware monitor automatically detects and displays the CPU, chassis, and power fan speeds in rotations per minute (RPM). If any of the fans is not connected to the motherboard, the specific field shows N/A. ASUS Terminator 2 barebone system 117