Asus T2-P T2-P User Manual - Page 27

Installing a CPU

Get Asus T2-P PDF manuals and user guides View all Asus T2-P manuals
Add to My Manuals
Save this manual to your list of manuals

Page 27 highlights

2.5 Installing a CPU The P4P8T motherboard comes with a surface mount 478-pin Zero Insertion Force (ZIF) socket. This socket is designed for Intel® Pentium® 4 Northwood/Prescott processor. 2.5.1 Removing the CPU fan and heatsink assembly The system package includes a pre-installed proprietary CPU fan and heatsink assembly to ensure optimum thermal condition and performance. DO NOT replace the proprietary CPU fan and heatsink with other models. You must remove the CPU fan and heatsink assembly before you can install a CPU. To remove the CPU fan and heatsink assembly: 1. Carefully press down the 1 locking lever of the retention bracket 2. Detach the retention bracket hook from the retention module hole by flipping the locking lever 2 to the direction of the arrow. 3. Slightly lift the retention bracket. 4. Detach the other retention bracket hook from the hole on the other side of the retention module, then lift. 5. Do steps 1 to 4 to remove the second retention bracket. 4 ASUS Terminator 2 barebone system 3 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
27
ASUS Terminator 2 barebone system
2.5
Installing a CPU
The P4P8T motherboard comes with a surface mount 478-pin Zero
Insertion Force (ZIF) socket. This socket is designed for Intel
®
Pentium
®
4
Northwood/Prescott processor.
2.5.1
Removing the CPU fan and heatsink assembly
The system package includes a pre-installed proprietary CPU fan and
heatsink assembly to ensure optimum thermal condition and performance.
3.
Slightly lift the retention bracket.
4.
Detach the other retention
bracket hook from the hole on
the other side of the retention
module, then lift.
5.
Do steps 1 to 4 to remove the
second retention bracket.
You must remove the CPU fan and heatsink assembly before you can
install a CPU.
To remove the CPU fan and heatsink assembly:
1.
Carefully press down the
locking lever of the retention
bracket
2.
Detach the retention bracket
hook from the retention module
hole by flipping the locking lever
to the direction of the arrow.
1
2
3
4
DO NOT
replace the proprietary CPU fan and heatsink with other
models.