Asus T2-P T2-P User Manual - Page 26

Removing the power supply

Get Asus T2-P PDF manuals and user guides View all Asus T2-P manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

2.4 Removing the power supply You must remove the power supply unit (PSU) before you can install a central processing unit (CPU) and other system components. To remove the PSU: 1. Lay the system on its side on a flat, stable surface. 2. Disconnect the optical drive and floppy disk drive power plugs. 3. Remove the screw that secures the PSU to the chassis. 3 4. Slide the PSU to the left until the side hook is disengaged from the chassis. 5. Push the PSU towards the front 4 6 panel for about half an inch. 6. Slightly lift the PSU. 5 7. Disconnect the power plugs on the motherboard, then set the PSU aside. When removing the PSU, 7 make sure to hold or support it firmly. The unit may accidentally drop and damage the other system 7 components. 26 Chapter 2: Basic installation

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
26
Chapter 2: Basic installation
2.4
Removing the power supply
You must remove the power supply unit (PSU) before you can install a
central processing unit (CPU) and other system components.
To remove the PSU:
1.
Lay the system on its side on a flat, stable surface.
2.
Disconnect the optical drive and floppy disk drive power plugs.
3.
Remove the screw that secures
the PSU to the chassis.
4.
Slide the PSU to the left until
the side hook is disengaged
from the chassis.
5.
Push the PSU towards the front
panel for about half an inch.
6.
Slightly lift the PSU.
3
4
5
6
7.
Disconnect the power plugs on
the motherboard, then set the
PSU aside.
7
7
When removing the PSU,
make sure to hold or support
it firmly. The unit may
accidentally drop and
damage the other system
components.