Asus TS300-E4 PX4 User Guide - Page 106
Primary, Tertiary, Fourth IDE Master/Slave
View all Asus TS300-E4 PX4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
For some Linux distributions which can not support SATA RAID, please set "ATA/ IDE Configuration" as [Compatible]. Otherwise, the Linux can not detect SATA HDD as IDE HDD. The AHCI allows the onboard storage driver to enable advanced Serial ATA features that enhance storage performance on random workloads by allowing the drive to internally optimize the order of commands. If you want the Serial ATA hard disk drives to use the Advanced Host Controller Interface (AHCI), set this item to [AHCI]. For details on AHCI, go to: www.intel.com/support/chipsets/imst/sb/CS-012304.htm www.intel.com/support/chipsets/imst/sb/CS-012305.htm The SATA controller is set to Native mode when this item is set to [RAID] or [AHCI]. The item Legacy IDE Channels appears only when you set the ATA/IDE Configuration to [Compatible]. Legacy IDE Channels [SATA Pri, PATA Sec] Allows you to set Serial ATA, Parallel ATA, or both, to native mode. When set as [SATA Only], SATA1, SATA2, SATA3 and SATA4 ports are available. When set as [SATA Pri, PATA Sec], SATA1, SATA3 and Primary IDE ports are available. When set as [PATA Pri, SATA Sec], SATA2, SATA4 and Primary IDE ports are available. When set as [PATA Only], only Primary IDE ports are available. Configuration options: [SATA Only] [PATA Pri, SATA Sec] [SATA Pri, PATA Sec] [PATA Only] IDE Detect Time Out (Sec) [35] Selects the time our value (in seconds) for detecting ATA/ATAPI devices. Configuration options: [0] [5] [10] [15] [20] [25] [30] [35] 5.3.5 Primary, Tertiary, Fourth IDE Master/Slave The BIOS automatically detects the connected IDE devices. There is a separate sub-menu for each IDE device. Select a device item, then press to display the IDE device information. Main BIOS SETUP UTILITY Primary IDE Master Device : Hard Disk Vendor : ST32122A Size : 2.1GB LBA Mode : Supported Block Mode : 16 Sectors PIO Mode : Supported Async DMA : MultiWord DMA-2 Ultra DMA : Ultra DMA-5 SMART Monitoring: Supported Select the type of device connected to the system. Type [Auto] LBA/Large Mode [Auto] Block(Multi-sector Transfer)M [Auto] PIO Mode [Auto] DMA Mode [Auto] SMART Monitoring [Auto] 32Bit Data Transfer [Enabled] Select Screen Select Item +- Change Option Tab Select field F1 General Help F10 Save and Exit ESC Exit v02.58 (C)Copyright 1985-2004, American Megatrends, Inc. 5-14 Chapter 5: BIOS setup