Asus TS300-E4 PX4 User Guide - Page 79
Gigabit LAN controller setting 3-pin LAN_EN1, LAN_EN2, RAID controller selection 3-pin RAID_SEL1 [
View all Asus TS300-E4 PX4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
5. Gigabit LAN controller setting (3-pin LAN_EN1, LAN_EN2) These jumpers allow you to enable or disable the onboard Broadcom® BCM5721 Gigabit LAN1 or LAN2 controller. Set to pins 1-2 to activate the Gigabit LAN controller. ® P5M2 P5M2 LAN_EN1 Setting LAN_EN1 2 1 Enable (Default) 3 2 Disable ® P5M2 LAN_EN2 2 1 Enable (Default) 3 2 Disable P5M2 LAN_EN2 Setting 6. RAID controller selection (3-pin RAID_SEL1) [PA4 model only] This jumper allows you to select the RAID configuration utility to use when you create disk arrays. Place the jumper caps over pins 1-2 if you want to use the LSI Logic Embedded SATA RAID Setup Utility (default); otherwise, place the jumper caps to pins 2-3 to use the Intel® Matrix Storage Manager. ® P5M2 P5M2 RAID_SEL1 Setting RAID_SEL1 2 1 LSI RAID ROM (Default) 3 2 INTEL RAID ROM ASUS TS300-E4 4-