Autodesk 64006-051108-9001 User Guide - Page 41

The Project Window 33 To manually change the size of the video image, do one of the following: • Drag the lower right corner of the Project window. • In the Windows menu, choose Half Size or press a 0 (zero) to display movies and images at half their normal size. This option is useful if you have a large movie or image and a small monitor. • Choose Full Size or press a 1 to display movies or images at their normal size. • Choose Double Size or press a 2 to display movies or images at double their normal size. This option is helpful for accurate cropping or to see what a movie looks like when played at double size. • Choose Fit to Window or press a 3 to display movies or images at the maximum size allowed by your monitor. The display size of the image in the Project window does not affect the final size of the image or movie. To control the size of the final image or video, use the parameters in the Image tab in the Settings window. The Movie Controller The Movie Controller shows the duration and current time of the source. It also has standard controls for movie playback. Depending on the speed of your computer and the format of the source file, the file may not play smoothly. Even if playback is not smooth within the Project window, the final encoded file will still play properly. If a source file does not play smoothly, use the movie controller to move to any spot in the movie or step through it frame by frame. In Point Out Point Immediately underneath the movie controller is a yellow line with a green point on the left side and a red point on the right side. The green and red points are the In and Out indicators that show the portion of the source file to be processed. To set the In and Out Points: 1. To set the In Point at the current time, press a [. 2. To set the Out Point at the current time, press a ]. Note: Move the time controller to the in point by pressing T and move the time controller to the out point by pressing Y.