Behringer MonoPoly Quick Start Guide - Page 19

36 MONOPOLY MONOPOLY SynthTool The "Synthtool.exe" application allows you to select the MIDI channel number and to set and adjust various parameters of the MONOPOLY to suit your preferences. Connect the MONOPOLY to your computer via USB and run the application (PC or MacOS). Check our website regularly for any updates to SynthTool.exe or MONOPOLY documentation. Typical SynthTool screens Note: for OUTPUT Parameters, the options are MIDI (DIN), MIDI (USB), or BOTH. Parameters can also be accessed via MIDI system Exclusive (SysEx) commands. Please see the information shown below. MONOPOLY System Exclusive Data Sheet The "Synthtool.exe" application allows you to select the MIDI channel number and to set and adjust various parameters of the MONOPOLY to suit your preferences. Parameters can also be accessed via MIDI system Exclusive (SysEx) commands. Please see the information shown below. SETTING VALUES VIA SYSEX Use the following data format to set global value using a SysEx message. F0 00 20 32 00 01 0c aa bb cc D0 ... Dn F7 00 20 32 = Manufacture SYSEX ID number (Behringer GmbH) 00 01 12 = MODEL ID for MONOPOLY aa = Device ID: 00-0x7F (must match hardware device ID), or 0x00 to address all devices. bb = Packet Number cc = Sub packet number (maybe absent for some message). D0..Dn = Packet payload Quick Start Guide 37 COMMAND TABLE Packet Number SysEx Packet 0E F0 00 20 32 00 01 12 DID 0E 01 nn mm F7 0F F0 00 20 32 00 01 12 DID 0F nn F7 10 F0 00 20 32 00 01 12 DID 10 nn mm pp F7 12 F0 00 20 32 00 01 12 DID 12 nn F7 15 F0 00 20 32 00 01 12 DID 15 nn F7 19 F0 00 20 32 00 01 12 DID 19 nn F7 1A F0 00 20 32 00 01 12 DID 1A nn F7 1B F0 00 20 32 00 01 12 DID 1B nn F7 21 F0 00 20 32 00 01 12 DID 21 nn F7 22 F0 00 20 32 00 01 12 DID 22 nn F7 23 F0 00 20 32 00 01 12 DID 23 nn F7 26 F0 00 20 32 00 01 12 DID 26 nn F7 27 F0 00 20 32 00 01 12 DID 27 nn F7 7D F0 00 20 32 00 01 12 DID 7D F7 Functions Set MIDI channel Set MIDI IN Transpose Set velocity info Set key priority Set modulation curve. Set external clock polarity. Set sync clock rate Set sync clock source. Set MIDI output of modulation wheel Set MIDI output of pitch wheel Set MIDI output of keyboard Set MIDI output of arpeggiator Set glide option Restore factory settings Note nn = Midi TX channel number to be set, range from [0-15] mm = Midi RX channel number to be set, range from [0-16], 16 = All channel. nn = transpose value [0-24]. Transpose range is -12 to + 12, so 12 is no transpose. nn = Key velocity of note on, 1 - 127 is a fixed value of velocity; 0 is dynamic velocity. mm = Key velocity of note off, 1 - 127 is a fixed value of velocity; 0 is dynamic velocity. pp = velocity Curve: 0 - SOFT, 1 - MED, 2 - HARD [0-LOW, 1- HIGH, 2-LAST] nn = curve [0-SOFT, 1-MED, 2-HARD] nn = [0-FALL, 1-RISE], nn = [0 - 1 PPS, 1 - 2 PPQ, 2 - 24 PPQ, 3- 48 PPQ] nn = [0 - Internal, 1 - MIDI DIN, 2 - MIDI USB, 3 - TRIG] nn = [0-OFF, 1-MIDI DIN, 2-MIDI USB, 3-BOTH] nn = [0-OFF, 1-MIDI DIN, 2-MIDI USB, 3-BOTH] nn = [0-OFF, 1-MIDI DIN, 2-MIDI USB, 3-BOTH] nn = [0-OFF, 1-MIDI DIN, 2-MIDI USB, 3-BOTH] nn = [0-Improved, 1-Original] Default nn = [0] mm = [0] [1] nn = [0], mm = [0], pp = [0] [2 - LAST] [0- SOFT] [1-RISE] [2--24 PPQ] [0 - Internal] [3-BOTH] [3-BOTH] [3-BOTH] [3-BOTH] [1-Original] COMMAND EXAMPLE COMMAND F0 00 20 32 00 01 12 00 0E 01 03 04 F7 F0 00 20 32 00 01 12 00 0F 18 F7 F0 00 20 32 00 01 12 00 10 00 30 00 F7 F0 00 20 32 00 01 12 00 12 01 F7 F0 00 20 32 00 01 12 00 15 02 F7 F0 00 20 32 00 01 12 00 19 00 F7 F0 00 20 32 00 01 12 00 1A 02 F7 F0 00 20 32 00 01 12 00 1B 02 F7 F0 00 20 32 00 01 12 00 21 00 F7 F0 00 20 32 00 01 12 00 22 01 F7 F0 00 20 32 00 01 12 00 23 02 F7 F0 00 20 32 00 01 12 00 26 02 F7 F0 00 20 32 00 01 12 00 27 01 F7 F0 00 20 32 00 01 12 00 7D F7 FUNCTION Set MIDI channel: TX channel = 0x3, RX channel = 0x4 Set MIDI IN Transpose +12 (+1 Octave) Set velocity: Velocity Note On = dynamic. Velocity Note Off = 48 Velocity Curve = SOFT Set key priority = High Set modulation curve = HARD Set external clock polarity FALL. Set sync clock type 24PPQ Set sync clock source as USB Set MIDI output of modulation wheel as OFF Set MIDI output of pitch wheel as MIDI DIN Set MIDI output of keyboard as MIDI USB Set MIDI output of arpeggiator as MIDI USB Set glide option as Original Restore factory settings