BenQ WDC20 User Manual - Page 12
Assembling the Host, Setting up the Host, Attaching the Host to the ceiling
View all BenQ WDC20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Assembling the Host Assemble the Host with four antennas by turning the antennas clockwise (right) and counterclockwise (left) to fasten them tightly. Setting up the Host You are provided with four different ways to position the Host. The total weight of the Host Unit is 330g. Attaching the Host to the ceiling 1. Place the lid on the ceiling and locate the alignment hole. 2. Use the screws provided to lock the lid to the ceiling. 3. Lock the first hole (1). 4. Follow the instruction in the illustration below to lock the other holes (2-4). 5. Rotate the Host counterclockwise to affix the Host to the lid. 1 Alignment hole 3 4 2 • Please only use the screws (M3*16 tapping screw) provided with the kit to mount the Host to the ceiling. • Please see Positioning the Host antennas on page 16 for guidelines on positioning the antenna to maximize signal reception. 12 Installation