Home » BenQ Manuals » Wireless » BenQ WDC20 » Manual Viewer

BenQ WDC20 User Manual - Page 19

Connecting the HDMI cable, Power supply via a power adapter

Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

Connecting the HDMI cable Connect the HDMI cable to the HDMI out jack of the Host and the HDMI input jack of the projector. HDMI HDMI Power supply via a power adapter (If an extender power cable is included in the package) Connect the male connector of the extender power cable to the power jack of the Host, then connect the supplied power adapter to the female connector of the extender power cable, and then plug the other end of the power adapter into a wall socket. Once the connection is set up press the power switch on the extender power cable to supply power to the Host, the LED indicator on the standby button of the Host lights up static green when the power is supplied. HDMI POWER HDMI Extender Power Cable (EU Countries Only) Installation 19

Section	Page
Copyright	2
Disclaimer	2
BenQ ecoFACTS	2
Introduction	5
Product features	6
Package content	7
Product specification	8
Overview	9
Button	9
Host	9
LED indicators of the Button and the Host	10
Installation	11
Environment check	11
Assembling the Host	12
Setting up the Host	12
Attaching the Host to the ceiling	12
Attaching the Host to a ceiling mount	13
Placing the Host on a table	13
Installing the Host on the wall or trolley	15
Positioning the Host antennas	16
For ceiling installation	16
For ceiling mount installation	16
For table placement	17
Connecting the HDMI cable and power	17
Assembling the adapter	18
Connecting the HDMI cable	19
Power supply via a power adapter	19
LAN connection	20
Setting up and powering a Button	20
Using Cable USB A(F) to USB A(M)	23
Pairing a Button and Host	24
When the Host is placed on a table	24
Storing Buttons and USB cable in the cradle	26
Resetting a Host	26
Resetting a Button	27
Enabling network standby mode	28
Starting and stopping presentations	29
Getting ready	29
Starting presentation	29
Idle presentation	30
Split screen presentations	31
Starting a split screen presentation	31
Switching from a split screen to a full screen presentation	32
Presenting with mobile devices	32
Touch back	34
Web management	35
Accessing the web management interface	35
Logging into the web management interface via direct connection	35
Logging into the web management interface via LAN	37
Logging into the web management interface via a wireless network	37
Getting started	39
Top command buttons	39
Change language	39
Logging out	39
Function bar	39
Main column	40
Information	40
WAN	42
Wireless Network	43
Setting	43
Wi-Fi Radio Setup	45
Wireless Nodes Status	48
Pairing	49
Advance Setting	51
Scheduling	56
Tool	57
Password Setup	57
Firmware Upgrade	58
Configuration Management	62
Wi-Fi Traffic Test	63
Log Setting	66
Legal Announcement	66

Match case Limit results 1 per page

Installation

Connecting the HDMI cable

Connect the HDMI cable to the HDMI out jack of the Host and the HDMI input jack of the

projector.

Power supply via a power adapter

(If an extender power cable is included in the package)

Connect the male connector of the extender power cable to the power jack of the Host, then

connect the supplied power adapter to the female connector of the extender power cable, and then

plug the other end of the power adapter into a wall socket. Once the connection is set up press the

power switch on the extender power cable to supply power to the Host, the LED indicator on the

standby button of the Host lights up static green when the power is supplied.

HDMI

POWER

HDMI

Extender Power Cable

(EU Countries Only)