BenQ WDC20 User Manual - Page 45
Wi-Fi Radio Setup, 4G Enable, Enable, Disable, Wireless Network, Setting, Apply, Transmission Power
![]() |
View all BenQ WDC20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
You can choose the available frequencies for the Host's Wi-Fi signal in the 2.4G Enable and 5G Enable fields. A 2.4G Wi-Fi signal is a signal that features a larger coverage range but slower data speeds and is more commonly used by older mobile devices, while a 5G Wi-Fi signal features faster data speeds at a smaller range. To enable or disable either 2.4G or 5G Wi-Fi signals by selecting Enable or Disable in the 2.4G Enable and/or 5G Enable fields. • Certain mobile devices are unable to access 5G Wi-Fi signals due to hardware limitations. If your mobile device is unable to connect to the Host via Wi-Fi, select Enable in the 2.4G Enable field. • Both 2.4G Enable and 5G Enable can be enabled at the same time. After you configure all the Wireless Network > Setting items, press Apply to proceed. Wi-Fi Radio Setup In the Transmission Power field you can set the strength of the Wi-Fi signal with the available options being of Heavy for a strong Wi-Fi signal (20 dbm for 2.4G; 15 dbm for 5G), Standard for a standard Wi-Fi signal (18 dbm for 2.4G; 12 dbm for 5G), and ECO (15 dbm for 2.4G; 10 dbm for 5G) for a weaker, energy saving signal. Web management 45
![](/manual_guide/products/benq-wdc20-user-manual-08092d5/45.png)