BenQ WDC20 User Manual - Page 59

Firmware Upgrade, New Firmware Version, Select File, Firmware File, button in

Get BenQ WDC20 PDF manuals and user guides View all BenQ WDC20 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 59 highlights

• Upgrading the Host's Firmware After checking for and confirming the availability of a new firmware upgrade you will be able to upgrade your Host's Firmware. The product allows you to upgrade the Host's firmware using either an OTA (Over The Air) upgrade or a direct upgrade from an upgrade file located on your local computer. To perform an OTA upgrade of the Host's firmware, click the Firmware Upgrade button in the New Firmware Version field. To perform an OTA ensure that the Host is connected via the WAN port to a router with access to the Internet. When performing any type of upgrade DO NOT do any of the following: • Power off or press the reset button on the Host or Button. • Close the browser window of the web management interface. Failure to follow these warnings will result in firmware upgrade failure and subsequent product failure. To perform a direct upgrade from an upgrade file located on your local computer follow the steps below: Before executing a direct firmware upgrade, please contact your BenQ regional office for access to the upgrade files. 1. Click the Select File button in the Firmware File field. 2. Navigate to and select the firmware upgrade file. Web management 59

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
59
Web management
• Upgrading the Host’s Firmware
After checking for and confirming the availability of a new firmware upgrade you will be able to
upgrade your Host’s Firmware. The product allows you to upgrade the Host’s firmware using either
an OTA (Over The Air) upgrade or a direct upgrade from an upgrade file located on your local
computer.
To perform an OTA upgrade of the Host’s firmware, click the
Firmware Upgrade
button in the
New Firmware Version
field.
To perform a direct upgrade from an upgrade file located on your local computer follow the steps
below:
1.
Click the
Select File
button in the
Firmware File
field.
2.
Navigate to and select the firmware upgrade file.
To perform an OTA ensure that the Host is connected via the WAN port to a router with access to the Internet.
When performing any type of upgrade DO NOT do any of the following:
• Power off or press the reset button on the Host or Button.
• Close the browser window of the web management interface.
Failure to follow these warnings will result in firmware upgrade failure and subsequent product failure.
Before executing a direct firmware upgrade, please contact your BenQ regional office for access to the upgrade
files.