BenQ WDC20 User Manual - Page 20
LAN connection, Setting up and powering a Button
View all BenQ WDC20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
(If no extender power cable is included in the package) Connect the supplied power adapter to the power jack of the Host, and then plug the other end of the power adapter into a wall socket. The LED indicator on the standby button of the Host lights up static green when the power is supplied. HDMI POWER HDMI For BenQ IFP (Interactive Flat Panel) products, please have power supplied via a power adapter. Do not keep the device powered on all the time. For better performance, power off the device for 30 minutes in every 24 hours then restart it. LAN connection The Host can be connected to a local network or directly to a laptop. The LAN connection can be used to configure your product and update the software. Insert a network cable with RJ-45 connectors into the LAN port and connect the other side to a LAN. Setting up and powering a Button 1. Connect the Button's HDMI and USB jacks to the corresponding inputs of a laptop. See the illustration. HDMI 1.4 USB 3.0 20 Installation