BenQ WDC20 User Manual - Page 21

If you purchase an additional Button viaButton Kit, please follow the process described below

Get BenQ WDC20 PDF manuals and user guides View all BenQ WDC20 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

2. The LED indicator of the Button will flash green while the Button is starting up. 3. When the Button is ready to present, the LED indicator will turn solid green. Press the Present key when the LED indicator turns green. • If the Button encounters problems while pairing with the Host during startup the LED indicator will flash red. Repeat the previous the process again until the LED turns solid green. See LED indicators of the Button and the Host on page 10 for more information on LED behavior. • Handle the Button cable with care. Rough handling might cause defects. • Pull/Push the plug instead of the cable when inserting or removing Buttons. If you purchase an additional Button (via a Button Kit), please follow the process described below: 1. Follow the pairing instructions described in Pairing a Button and Host on page 24. 2. Connect the Button's HDMI and USB jacks to the corresponding inputs of a laptop. See the illustration. HDMI 1.4 USB 3.0 Installation 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
21
Installation
2.
The LED indicator of the Button will flash green while the Button is starting up.
3.
When the Button is ready to present, the LED indicator will turn solid green. Press the Present
key when the LED indicator turns green.
If you purchase an additional Button (via a Button Kit), please follow the process described below:
1.
Follow the pairing instructions described in
Pairing a Button and Host on page 24
.
2.
Connect the Button’s HDMI and USB jacks to the corresponding inputs of a laptop. See the
illustration.
• If the Button encounters problems while pairing with the Host during startup the LED indicator will flash red.
Repeat the previous the process again until the LED turns solid green. See
LED indicators of the Button and
the Host on page 10
for more information on LED behavior.
• Handle the Button cable with care. Rough handling might cause defects.
• Pull/Push the plug instead of the cable when inserting or removing Buttons.
USB
3.0
HDMI
1.4