BenQ WDC20 User Manual - Page 13
Attaching the Host to a ceiling mount, Placing the Host on a table
View all BenQ WDC20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Attaching the Host to a ceiling mount If the display is mounted on the ceiling: 1. Attach the Host to the ceiling mount using the provided velcro strap. 2. Fix the Host to the mounting holder. 3. Use the supplied velcro to fix the mounting holder and the Host to the ceiling mount as shown in the illustration. • Please only use the velcro strap (300(L)mm*25(W)mm) provided with the kit to mount the Host to a ceiling mount. • Please see Positioning the Host antennas on page 16 for guidelines on positioning the antenna to maximize signal reception. Placing the Host on a table If your display is placed on a table, first attach the lid of to the Host in the following the process described below: 1. Align the lid over the bottom of Host so that the triangle on the bottom side of the lid is aligned to the triangle in the lid compartment, then insert the lid into the lid compartment. Installation 13