Binatone iDECT C10i User Manual - Page 32

7.7.1 Turn on or off the Call Barring 1. Press . 2. Press to select ADV SETTING. 3. Press to show CALL BARRING and then press . 4. Modify the displayed PIN, if necessary, using to delete digits and the keypad to enter new ones. 5. Press to show MODE and then to select. 6. Press to select ON or OFF and then to confirm. If it has been turned ON, CALL BARRING will be shown on the display when the handset returns to standby mode. 7.7.2 To Program a Call Barring number 1. Press . 2. Press to select ADV SETTING. 3. Press to show CALL BARRING and then press . 4. Modify the displayed PIN, if necessary, using to delete digits and the keypad to enter new ones. 5. Press to select NUMBER and then press . 6. Press to select NUMBER 1, 2 or 3 and press to confirm. 7. Enter the number you want to bar (up to the first 4-digits) and then press to confirm. 8. Repeat steps 6 and 7 if you want to set more barred numbers. 7.8 Reset your phone This feature allows you to restore all system settings, except the answering machine messages and phonebook, to default settings. This feature could be useful, for example, if you have forgotten the System PIN to access the answering system remotely. 1. Press . 2. Press to select ADV SETTING and then press . 3. Press to select RESET and then press . 4. Press again to confirm the reset. NOTE: All settings under the ANS SYSTEM, BLOCK LIST, PROGRAM DND, CLOCK & ALARM, SETTINGS, HANDSET TONES, BASE TONES and ADV SETTING menus in the handset will be restored to default settings,and the redial list and call log will also be cleared for the whole system. 30