Biostar M7VKG M7VKG user's manual - Page 44
Quick Power On Self Test, Swap Floppy Drive, Boot Up Floppy Seek, Boot Up NumLock Status
View all Biostar M7VKG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Chapter2 BIOS Setup Quick Power On Self Test This category speeds up Power on Self-Test (POST) after you power up the computer. If it is set to Enable, Bios will shorten or skip some check items during POST. Enabled (default) Enable quick POST. Disabled Normal POST. Swap Floppy Drive If the system has two floppy drives, you can swap the logical drive name assignments. The Choices: Enabled, Disabled (default). Boot Up Floppy Seek Seeks disk drives during boot up. Disabling speeds boot-up. The Choices: Enabled (default), Disabled. Boot Up NumLock Status Select power on state for NumLock. On (default) Numpad is number keys. Off Numpad is arrow keys. Gate A20 Option Select if chipset or keyboard controller should control Gate A20. Normal A pin in the keyboard controller controls Gate A20. Fast (default) Lets chipset control Gate A20. Typematic Rate Setting This determines the typematic rate. Enabled Disabled (default) Enable typematic rate and typematic delay programming. Disable typematic rate and typematic delay programming. The system BIOS will use default value and the keyboard controls the function. 2-10