Bosch HGI8056UC Use and Care Manual - Page 37
To replace the oven door
View all Bosch HGI8056UC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
3. Bring both door hinge levers to their fullest down position as shown in the illustration. The left and right door hinge levers may differ slightly but operate in the same manner. 4. Close the oven door until it catches on the hinge stop levers, locking the hinges at the proper angle for door removal. The door will be open about 7 inches at the top. This takes the spring tension off the hinges so the door can be easily lifted out. 5. The door is heavy. Use both hands to firmly grip it by the sides. Do not grip the door by the handle. Maintaining the door angle, lift the door straight up approximately 3/4" to unhook the hinges from the slots and then pull it out towards you until the hinges are clear of the oven housing. 6. Place the door in a convenient and stable location for cleaning. To replace the oven door: 1. Holding the door firmly in both hands, grip it on either side, not by the handle. 2. Tilt the door back slightly towards you until it opens about 7" at the top. 3. Slide the hinges into the slots as far as they will go and then lower the door straight down. The angle of the door may need to be adjusted slightly to allow the hinges to engage properly and the door to lower into place. The door should lower about 3/ 4" and stop. If not, the hinges have not engaged properly and the door could fall if it is released. 4. Once both hinges are fully engaged as described in Step 3, gently open the door until it is fully open. 5. Push the levers on both the hinges up and forward until they are locked into the slot, flush with the front of the oven body. 6. Close and open door slowly to be sure it is correctly and securely in place. English 34