Bosch WTMC5530UC Operating, Care, Installation - Page 13
Accessories
View all Bosch WTMC5530UC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Required Ductwork Parts The parts required for the exhaust air system (elbows, lines, exhaust air outlets) are not included in standard delivery of the dryer (see the Accessories section for information on ordering parts.) Professional installation of ductwork is recommended. Accessories The following optional accessories for your dryer may be obtained from customer service (see page 26) or from your local dealer. Please follow the installation instructions supplied by the appropriate manufacturer. Side exhaust kit part no. WTZ 1265 Note: See notes on maximum number of elbows on page 12. i A special tool is required for cutting the exhaust hole in the dryer side panel. For further information please contact your local dealer. Bottom exhaust kit part no. WTZ 1270 Note: See notes on maximum number of elbows on page 12. LP - Gas Kit part no. WTZ 1280 The parts required for the LP version can be obtained from your local dealer. Please follow the installation instructions supplied by the appropriate manufacturer! Note: Dryer must be checked for proper operation whenever the gas connections have been broken. Dryer rack part no. WTZ1290 Use the dryer rack to dry washable woolen textiles (e.g. sweaters) and shoes. Left hinge kit part no. WTZ1260 for white part no. WTZ1260S for solid silver tone and for duo-tone color The door is hinged on the right side at the factory. The door catch can be reversed if necessary. Please contact your dealer or our customer service team (see page 26) Pedestal Mounting Kit 8 inch pedestal accessory number WTZ 1295 for solid white color WTZ 1295S for solid tone silver WTZ 1295P for duo tone silver/white 15 inch pedestal accessory number WTZ 1500 for solid white color WTZ 1500S for solid tone silver WTZ 1500P for duo tone silver/white WTZ 1500C for duo tone champagne/white If mounting the dryer on the pedestal follow the instructions supplied with the pedestal before proceeding any further. Mobile home kit part no. WTZ 1275 Note: Please check with the Authority Having Jurisdiction in your area to verify if a gas dryer can be installed in your mobile home. Once that has been verified, installation of the dryer shall conform to the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 {formerly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD (Part 280)}, and/or Standard CAN/CSAĆZ240 MH. The kit includes a means to secure the dryer to the structure. See page 11 Exhaust Air Connection" for the exhaust duct installation instructions. The exhaust duct must be securely fastened to a noncombustible portion of the mobile home structure and must not terminate beneath the mobile home. An opening to the outside must be provided during installation. Insure that the free area of the opening for the introduction of outside air is not less than twice the area of the dryer exhaust outlet or use at least a 5 inch diameter exhaust or at least a 25 in2 square exhaust duct for the opening. 13