Bowflex Ultimate 2 Assembly Manual - Page 22
Step 4, Step 5
View all Bowflex Ultimate 2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
21 Assembling Your Bowflex Ultimate® 2 STEP 4 Front Plastic Cover Parts: • Base Assembly (from step 3) • Front & Rear Plastic Base Covers (Box 2) Tool: • Hex Key (7/32") Pan Head Allen Bolt Washer 4-1 Position Plastic Covers on Front and Rear Base Platforms. 4-2 Install and completely tighten the hardware. Hardware (1:1): Rear Plastic Cover 9 Pan Head Allen Bolt (1/4" X 1/2") 9 Washers (1/4") STEP 5 Parts: • Base Assembly • Front Base Plate (Box 3) Hex Washer Head Screw • Front Base Feet (4) (Box 5) Tools: Front Base Plate • Wrench (5/16") • Phillips Head Screwdriver 5-1 Fold the front base assembly into the upright position. 5-2 Position the Base Plate and secure with eight Phillips Head Screws and Washers. 5-3 Position the four Base Feet and secure with Hex Washer Head Screws. Do not over tighten. Feet could crack with excess pressure! 5-4 Completely tighten the Base Plate hardware. Washer Phillips Head Screw Front Base Foot Hardware (1:1): 8 Self Tapping Screws (#8 X 3/4") 8 Washers (#8 ) 4 Coach Screws (#10 X 3/4")