Bowflex Ultimate 2 Assembly Manual - Page 34

33 Assembling Your Bowflex Ultimate® 2 STEP 24 Parts: • Ab Crunch Assembly (from step 22) • Ab Back Pad (Ab Box) • Roller Pads (Ab Box) • Middle Pad (Ab Box) • Roller Pad Shaft (Ab Box) • End Caps (Ab Box) Tool: • Hex Key (3/16") Middle Pad Roller Pad Shaft Ab Back Pad Bracket Arms 24-1 Place the Middle Pad between the arms on the bracket. Slide the Roller Pad Shaft through bracket and the Middle Pad then install Roller Pads and End Caps. 24-2 Align the Ab Back Pad with the wider end pointing Pan Head Allen Bolt toward the Handlebars. Washer 24-3 Install and completely tighten hardware. Hardware (1:1): Hardware for this step is in the hardware bag in the AB BOX. Roller Pad End Cap 4 Pan Head Allen Bolt (5/16" X 1") 4 Washers (5/16") STEP 25 Parts: • Ab Crunch Assembly (from step 23) Tool: • Wrench (1/2") - or Adjustable Wrench 25-1 Undo the 1/2" bolt from the bracket at the upper end of the cable and use the same 1/2" bolt to attach the bracket to the tab on the Pivot Arm. Ab Pivot Arm Tab Bolt