Bowflex Ultimate 2 Assembly Manual - Page 25
Step 8, Step 9
View all Bowflex Ultimate 2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Assembling Your Bowflex Ultimate® 2 STEP 8 (Do Not Tighten The Hardware For This Step Until Step 9 ) Parts: • Lower Lat Tower Uprights (Box 4) • Squat Holder (Box 4) • Cross Brace (Box 4) Tool: • Hex Key (7/32") Pan Head Allen Bolt 8-1 Insert Cross Brace and Squat Holder into Lower Lat Tower Uprights. Make sure the Squat Holder faces the the front of the Uprights. The label is on the front and the screw holes are on the back of the holder. Squat Holder 8-2 Install but do not tighten the hardware until Step 9. Label 24 Cross Brace Hardware (1:1): The Cross Brace is on the front of the Uprights 2 Pan Head Allen Bolt (3/8" X 3/4") 2 Washers (3/8") Lower Lat Tower Uprights STEP 9 Parts: • Lower Lat Tower Assembly (from step 8) • Base Assembly Tools: • Hex Key (7/32") • Wrench (9/16") - or Adjustable Wrench 9-1 Place Lower Lat Tower over extrusions on Base Assembly. 9-2 Install and completely tighten the hardware from steps 8 and 9. Hardware (1:1): Lower Lat Tower Assembly Pan Head Allen Bolt 2 1/2" Washer Pan Head Allen Bolt 3/4" Nylock Nut (Rod Pack Not Shown For Clarity) 4 Pan Head Allen Bolt (3/8" X 3/4") 2 Pan Head Allen Bolt (3/8" X 2 1/2") 8 Washers (3/8") 2 Nylock Nuts (3/8")