Brother International DCP-7040 Users Manual - English - Page 22
If you put any print media in the manual, feed slot before the machine is in
UPC - 012502620655
View all Brother International DCP-7040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Chapter 2 c Using both hands, slide the manual feed slot paper guides to the width of the paper that you are going to use. d Using both hands, put one sheet of paper or one envelope in the manual feed slot until the front edge of the paper or envelope touches the paper feed roller. When you feel the machine pull in the paper, let go. Note • Put the paper into the manual feed slot with the side to be printed face up. • Make sure that the print media (paper, transparency and so on) is straight and in the proper position on the manual feed slot. If it is not, the paper or the transparency may not be fed properly, resulting in a skewed printout or a paper jam. • Do not put more than one sheet of paper in the manual feed slot at any one time, as it may cause a jam. • If you put any print media in the manual feed slot before the machine is in the Ready state, the print media may be ejected without being printed on. • To easily remove a small printout from the output tray, lift up the scanner cover by using both hands as shown in the illustration. • You can still use the machine while the scanner cover is up. To close the scanner cover, push it down with both hands. 10