Brother International DCP-7040 Users Manual - English - Page 29
Loading documents, Using the automatic document feeder (ADF) (DCP-7040 only), Recommended environment - dcp ink
UPC - 012502620655
View all Brother International DCP-7040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Loading paper and documents Loading documents 2 Using the automatic document feeder (ADF) (DCP-7040 only) 2 The ADF can hold up to 35 pages and feeds each sheet individually. Use standard 20 lb (80 g/m2 ) paper and always fan the pages before putting them in the ADF. Recommended environment 2 Temperature: 68° F to 86° F (20 to 30° C) Humidity: 50% - 70% Paper: Xerox 4200 (20 lb/Letter) CAUTION DO NOT leave thick documents on the scanner glass. If you do this, the ADF may jam. DO NOT use paper that is curled, wrinkled, folded, ripped, stapled, paper-clipped, pasted or taped. DO NOT use cardboard, newspaper or fabric. To avoid damaging your machine while using the ADF, DO NOT pull on the document while it is feeding. To scan non-standard documents see Using the scanner glass on page 18. Make sure documents written with ink are completely dry. Documents must be from 5.8 to 8.5 in. (148 to 215.9 mm) wide and from 5.8 to 14 in. (148 to 355.6 mm) long, and of a standard weight [20 lb (80 g/m2)]. 2 a Unfold the ADF document output support flap (1) and the ADF support flap (2). 2 1 b Fan the pages well. c Place your document, face up top edge first, in the ADF until you feel it touch the feed roller. d Adjust the paper guides(1) to fit the width of your document. 1 17