Brother International DCP-7040 Users Manual - English - Page 75

Cleaning the scanner glass

Page 75 highlights

b Pull the paper tray completely out of the machine. c Wipe the outside of the machine with a soft cloth to remove dust. Troubleshooting and routine maintenance g Plug the machine's power cord back into the AC power outlet first, and then reconnect all cables. Turn on the machine's power switch. Cleaning the scanner glass B a Turn off the machine's power switch. Disconnect all cables and then unplug the power cord from the AC power outlet. b Lift the document cover (1). Clean the white plastic surface (2) and scanner glass (3) underneath it with a soft lint-free cloth moistened with water. 1 B 2 3 d Remove anything that is stuck inside the paper tray. e Wipe the inside and the outside of the paper tray with a soft cloth to remove dust. c (DCP-7040 only) In the ADF unit, clean the white bar (1) and the scanner glass strip (2) underneath it with a soft lint-free cloth moistened with water. 1 f Re-load the paper and put the paper tray firmly back in the machine. 2 63

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108

Troubleshooting and routine maintenance
63
B
b
Pull the paper tray completely out of the
machine.
c
Wipe the outside of the machine with a
soft cloth to remove dust.
d
Remove anything that is stuck inside the
paper tray.
e
Wipe the inside and the outside of the
paper tray with a soft cloth to remove
dust.
f
Re-load the paper and put the paper tray
firmly back in the machine.
g
Plug the machine’s power cord back into
the AC power outlet first, and then
reconnect all cables. Turn on the
machine’s power switch.
Cleaning the scanner glass
B
a
Turn off the machine’s power switch.
Disconnect all cables and then unplug
the power cord from the AC power
outlet.
b
Lift the document cover (1).
Clean the white plastic surface (2) and
scanner glass (3) underneath it with a
soft lint-free cloth moistened with water.
c
(DCP-7040 only) In the ADF unit, clean
the white bar (1) and the scanner glass
strip (2) underneath it with a soft lint-free
cloth moistened with water.
1
3
2
1
2