Brother International HE-800A Instruction Manual - English - Page 109
Unraveling of thread trimmed by upper thread trimmer assembly - 2 service manual
View all Brother International HE-800A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
16. TROUBLESHOOTING Unraveling of thread trimmed by upper thread trimmer assembly Cause Upper thread trimmer assembly Check Installation position of upper thread trimmer assembly Remedy Adjust the installation position of upper thread trimmer assembly by moving the setting plate assembly. Upper thread trimmer longitudinal position adjust- ment Upper thread trimmer cutting depth adjustment Page Service manual 4005Q Burr on tips of upper thread trimmer M and upper thread trimmer U. Polish with buff or replace the part. Check burr on upper side here Check burr here - Tension timing release Opening amount of zigzag tension discs and bar tack tension discs (particularly zigzag tension discs) 4009Q Adjust the zigzag tension discs by moving the tension stud bracket in and out. Adjust the bar tack tension discs opening amount to 0.5 - 1.0 mm by removing the top cover and moving the tension release cam. - Work clamp Zigzag tension Tack tension 0.5 - 1 mm 4008Q Work clamp lifting speed Use memory switch No. 02 to retard the work clamp lifting speed. 79 101 HE-800A