Brother International HE-800A Instruction Manual - English - Page 26
Installation underneath the work table, Connecting the cords
View all Brother International HE-800A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
4) Installation underneath the work table Work table hole positions 4. INSTALLATION 3878Q 2075Q 3877Q 3879Q Standard BROTHER work tables are provided with installation holes for use in installing the transformer. 1. Remove the four screws (1), and then remove the two handles (2). 2. Use the bolts (4), flat washers (5), spring washers (6) and nuts (7) to install the transformer as shown in the illustration, while leaving a gap of 2 mm between the work table and the cushion collars (3). * Use the bolts, flat washers, spring washers, nuts and cushion collars which are included. Connecting the cords 3880Q 3881Q 1. Loosen the four screws (1), and then remove the transformer cover (2). 2. Connect the control box connector (3) to the transformer connector (4). 3. Secure the connected cords with the cord holder (5) and the screw (6), and place them inside the transformer cover (2). 4. Install the transformer cover (2) with the four screws (1). 5. Secure the cords to the work table using staples. HE-800A 18