Brother International HE-800A Instruction Manual - English - Page 110
Upper thread mis-trimming, Needle strikes upper thread trimmer
View all Brother International HE-800A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
16. TROUBLESHOOTING Upper thread mis-trimming Cause Upper thread trimmer assembly Check Installation position of upper thread trimmer assembly Remedy Adjust the installation position of upper thread trimmer assembly by moving the setting plate assembly. Upper thread trimmer longitudinal position adjustment Upper thread trimmer cutting depth adjustment Page Service manual Upper thread trimmer assembly holding force 4005Q Adjust so that the thread does not come out when you cut it with scissors and hold the end of the thread between your fingers and gently swing the assembly. Bend the scissors U or replace them so that the correct force is applied. Repair any damage from striking the needle. Cotton yarn #60 - Holding force approx. 2N Trimmer driving arm Upper thread cutting depth 4006Q trimmer Adjust the position of the trimmer driving arm roller. Service manual Needle strikes upper thread trimmer Cause Upper thread trimmer assembly Check Installation position of upper thread trimmer assembly Remedy Adjust the installation position of upper thread trimmer assembly by moving the setting plate assembly. Upper thread trimmer longitudinal position adjustment Upper thread trimmer cutting depth adjustment Page Service manual upper thread operating force 4005Q trimmer Remove any scratches and burrs, and adjust the upper thread trimmer M to open when the projection is pressed with a force of 4N or less. - HE-800A 4010Q 102